Owner's Manual

AAA Commands 63
password
The password line configuration command specifies a password on a line. To remove the password,
use the
no form of this command.
Syntax
password password [ encrypted ]
no password
• password —Password for this level. (Range: 1-159 characters)
•
encrypted —Encrypted password to be entered, copied from another device
configuration.
Default Configuration
This command has no default configuration.
Command Mode
Line Configuration mode
User Guidelines
If an encrypted password is specified on a line, the required password length is 32 characters.
Example
The following example specifies a password "dell" on a line.
enable password
The enable password global configuration command sets a local password to control access to
normal and privilege levels. To remove the password requirement, use the
no form of this
command.
Syntax
enable password [ level level ] password [ encrypted ]
no enable password [ level level ]
•
password —Password for this level (Range: 1-159 characters).
•
level —Level for which the password applies. If not specified ,the level is 15 (Range: 1-15).
•
encrypted —Encrypted password entered, copied from another device configuration.
Console (config-line)# password dell