Owner's Manual

66 AAA Commands
www.dell.com | support.dell.com
password-aging
The password-aging line configuration command configures the expiration time of line passwords
in the local database. To return to the default configuration, use the
no form of this command.
Syntax
password-aging days
no password-aging
• days— The number of days before a password expires (Range: 1-365).
Default Configuration
No password expiration time.
Command Mode
Line Configuration mode
User Guidelines
The password expiration date is calculated from the day the password is defined, and not from
the day aging time is defined.
Ten days before the password expiration date, the user receives a warning to change the
password within "n" days. These warnings continue until the password expiration date.
After the password expiration date, the user receives three chances to log in and change the
password. If the user still does not change the password, the account is locked.
Example
The following example configures password aging to 120 days.
passwords aging
The passwords aging global configuration command configures the expiration time of local
username and enable passwords in the local database. To return to the default configuration, use
the
no form of this command.
Syntax
passwords aging username name days
no passwords aging username name
passwords aging enable-password level days
Console (config)# line telnet
Console (config-line)# password-aging 120