Owner's Manual

Address Table Commands 97
Example
In this example, all static entries in the bridge-forwarding database are displayed.
show bridge multicast address-table
The show bridge multicast address-table privileged EXEC command displays Multicast MAC
address table information.
Syntax
show bridge multicast address-table [ vlan vlan-id ] [ address mac-multicast-address | ip-
multicast-address
] [ format ip | mac ]
•
vlan_id —A VLAN ID value.
•
mac-multicast-address —A MAC Multicast address.
•
ip- multicast-address— An IP Multicast address.
•
format — Multicast address format. Can be ip or mac . If format is unspecified, the default
is
mac .
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
There are no user guidelines for this command.
Console# show bridge address-table static
Aging time is 300 sec
vlan mac address port type
---- -------------- ----- -----
1 00.60.70.4C.73.FF g8 permanent
1 00.60.70.8C.73.FF g8 delete-on-timeout
200 00.10.0D.48.37.FF g9 delete-on-reset