Command Reference Guide

Fabric OS Command Reference 147
53-1002746-01
configRemove
2
configRemove
Deletes a saved configuration file.
SYNOPSIS configremove -local | -USB | -U [file]
DESCRIPTION This command deletes a configuration file that was previously saved to the local chassis or to an
attached USB device by using the configUpload command.
NOTES The execution of this command is subject to Virtual Fabric or Admin Domain restrictions that may be in
place. Refer to Chapter 1, "Using Fabric OS Commands" and Appendix A, "Command Availability" for
details.
OPERANDS This command has the following operands:
-local
Removes a configuration file that was previously created by configUpload -local
from the local chassis.
-USB | -U
Removes a configuration file that was previously created by configUpload -USB
from an attached USB device.
file
Specifies the configuration file to be removed. If the file option is omitted, the
command prompts for a file name.
EXAMPLES To remove a configuration file from the local chassis:
switch:admin> configremove -local first_config.txt
To remove a configuration file from an attached USB device without specifying a filename:
switch:admin> configremove -USB
File Name [config.txt]: second_config.txt
SEE ALSO configDownload, configUpload, configList, configShow