Command Reference Guide

234 Fabric OS Command Reference

53-1002746-01

diagDisablePost

Disables the power-on self-test (POST).

SYNOPSIS diagdisablepost

DESCRIPTION Use this command to disable POST. A reboot is not required for this command to take effect. Use the

diagPost command to display the current POST status, and use diagEnablePost to enable POST.

NOTES The execution of this command is subject to Virtual Fabric or Admin Domain restrictions that may be in

place. Refer to Chapter 1, "Using Fabric OS Commands" and Appendix A, "Command Availability" for

details.

OPERANDS None

EXAMPLES To disable the POST:

switch:admin> diagdisablepost

Config update Succeeded

Diagnostic POST is now disabled.