Command Reference Guide

248 Fabric OS Command Reference
53-1002746-01
dnsConfig
2
dnsConfig
Sets, displays, or removes domain name service (DNS) parameters.
SYNOPSIS dnsconfig
dnsconfig --add -domain name -serverip1 ipaddr serverip2 ipaddr
dnsconfig --delete
dnsconfig --show
dnsconfig --help
DESCRIPTION Use this command to display, set, or remove the domain name service parameters.
The domain name service parameters are the domain name and the name server IP address for primary
and secondary name servers. The dnsconfig command displays IPv4 and IPv6 addresses.
NOTES The execution of this command is subject to Virtual Fabric or Admin Domain restrictions that may be in
place. Refer to Chapter 1, "Using Fabric OS Commands" and Appendix A, "Command Availability" for
details.
OPERANDS This command has the following operands:
--add
Sets the DNS configuration.
-domain name
Specifies the DNS domain name.
-serverip1 ipaddr
Specifies the DNS primary server IP address. The IP address can be an IPv4 or
IPv6 address.
-serverip2 ipaddr
Specifies the DNS secondary server IP address. The IP address can be an IPv4
or IPv6 address.
--delete
Removes the DNS configurations.
--show
Displays the current DNS configuration.
--help
Displays the command usage.
EXAMPLES To set the DNS parameters for the system:
switch:admin> dnsconfig
Enter option
1 Display Domain Name Service (DNS) configuration
2 Set DNS configuration
3 Remove DNS configuration
4 Quit
Select an item: (1..4) [4] 2
Enter Domain Name: [] domain.com