Command Reference Guide

Fabric OS Command Reference 267
53-1002746-01
fabricLog
2
fabricLog
Displays (all users) or manipulates (admin) the fabric log.
SYNOPSIS fabriclog -s | --show [dport]
fabriclog -c | --clear [dport]
fabriclog -d | --disable
fabriclog -e | --enable
fabriclog -r size | --resize size
fabriclog -h | --help
DESCRIPTION Use this command to display, clear, disable, enable, or resize the fabric log. When used with the --show
option, this command displays the following information:
Time Stamp
Time of the event in the following format HH:MM:SS:MS.
Input and *Action
Fabric log message. An asterisk (*) in the message indicates an action. The link
reset information is indicated by LR_IN and LR_OUT. LR_IN indicates a link reset
on the remote switch, whereas LR_OUT indicates a link reset on the local switch.
S
Current switch state. Valid switch states include the following:
FO
Build Fabric (BF) received.
F1
Reconfigure Fabric (RCF) is not supported.
F2
Exchange Fabric Parameters (EFP) is waiting for last Accept Frame (ACC) from
flood.
F3
Flood EFPs.
D0
The switch is the principal switch.
D1
The principal switch is sending Domain ID Assigned (DIA).
D2
The principal switch is waiting for Request Domain ID (RDI).
D3
The principle switch is processing the RDI.
A0
The switch is not the principal switch.
A1
The non-principal switch is sending a DIA.
A2
The non-principal switch is waiting for an RDI.