Command Reference Guide

356 Fabric OS Command Reference

53-1002746-01

ficonCfg

Configures the specified FICON database.

SYNOPSIS ficoncfg --set database port

ficoncfg --reset database

ficoncfg --help

DESCRIPTION Use this command to configure a FICON database on a specified port. Refer to ficonShow for a

description of the database content.

NOTES The execution of this command is subject to Virtual Fabric or Admin Domain restrictions that may be in

place. Refer to Chapter 1, "Using Fabric OS Commands" and Appendix A, "Command Availability" for

details.

OPERANDS This command has the following operands:

port

Specifies the port to be configured. You can specify the port by its port index

number or by a hexadecimal number. Use switchShow for a listing of valid port

index numbers.

--set

Sets the configuration entry.

--reset

Resets the configuration entry to its default value.

database

Specifies the name of the FICON database. The only database currently

supported is the following:

LIRR

Devices registered to receive link incident reports.

EXAMPLES To set the LIRR database on a port using a decimal index number:

switch:user> ficoncfg --set LIRR 27

To reset the LIRR

switch:user> ficoncfg --reset LIRR

To set the LIRR database using a hexadecimal port number:

switch:user> ficoncfg --set LIRR 0x1b

switch:user> ficonshow LIRR

The Local LIRR database has 0 entries.

Current LIRR device port number: 27 (0x1b)