Command Reference Guide

Fabric OS Command Reference 549
53-1002746-01
nbrStateShow
2
nbrStateShow
Displays the state of FSPF neighbors.
SYNOPSIS nbrstateshow [slot/][port]
DESCRIPTION Use this command to display information about fabric shortest path first (FSPF) neighbors to the local
switch or information about a neighbor to a specified port. FSPF defines a neighbor as a remote E_Port
interface that is directly attached to the local switch. However, if ports are trunked, the command displays
data only about the trunk master.
This command displays the following fields:
Local Domain ID
Domain ID of the local switch.
Local Port
E_Port interface on the local switch. This value is typically equal to the Index field
reported in the switchShow command.
Domain
Domain ID of the remote switch.
Remote Port
E_Port interface on the remote switch.
State
State of the neighbor. The neighbor can be in one of the following five states:
0
NB_ST_DOWN - The neighbor is down.
1
NB_ST_INIT - The neighbor is initializing.
2
NB_ST_DB_EX - The neighbor and the switch are exchanging data from their
Link State Records (LSR) databases.
3
NB_ST_DB_ACK_WT -The neighbor is waiting for the switch to acknowledge the
LSR database.
4
NB_ST_DB_WT - The LSR Database is in waiting state; synchronization is in
process.
5
NB_ST_FULL - The neighbor is in the last, finishing state. The E_Port can route
frames only if the neighbor is in full state.
NOTES The execution of this command is subject to Virtual Fabric or Admin Domain restrictions that may be in
place. Refer to Chapter 1, "Using Fabric OS Commands" and Appendix A, "Command Availability" for
details.
OPERANDS This command has the following operands:
slot
For bladed systems only, specify the slot number of the port to display, followed by
a slash (/).