Command Reference Guide

582 Fabric OS Command Reference
53-1002746-01
passwdCfg
2
Digits value out of range
The -digits value specified must be greater than or equal to 0 and less than or
equal to -minlength value.
Punctuation value out of range
The -punctuation value specified must be greater than or equal to 0 and less
than or equal to -minlength value.
Total strength specification out of range
The total of -lowercase value, -uppercase value, -digits value, and
-punctuation value must be less than or equal to -minlength value.
History value out of range
The -history value must be between 1 and 24.
Minpasswordage value out of range
The -minpasswordage value must be between 0 and 999.
Maxpasswordage value out of range
The -maxpasswordage value must be between 0 and 999.
Warning value out of range
The -warning value must be between 0 and 999.
Invalid password expiration specification
The -minpasswordage value or -warning value must be less than or equal to
-maxpasswordage value when -maxpasswordage value is nonzero.
Lockoutthreshold value out of range
The -lockoutthreshold value must be between 0 and 999.
Lockoutduration value out of range
The -lockoutduration value must be between 0 and 99999.
Repeat value out of range
The -repeat
value must be between 1 and 40.
Sequence value out of range
The -sequence value must be between 1 and 40.
EXAMPLES To display the current password configuration parameters:
switch:admin> passwdcfg --showall
passwdcfg.minlength: 8
passwdcfg.lowercase: 0
passwdcfg.uppercase: 0
passwdcfg.digits: 0
passwdcfg.punctuation: 0
passwdcfg.history: 1
passwdcfg.minpasswordage: 0
passwdcfg.maxpasswordage: 0
passwdcfg.warning: 0
passwdcfg.lockoutthreshold: 0
passwdcfg.lockoutduration: 30
passwdcfg.status: 0
To set password configuration parameters, specifying that a password must contain at least two
uppercase characters, and that passwords expire in 90 days from the date they are defined:
switch:admin> passwdcfg --set -uppercase 2 \
-maxpasswordage 90