Command Reference Guide

Fabric OS Command Reference 655
53-1002746-01
portCfgAutoDisable
2
port[-port]
Specifies a port or a port range, relative to the slot number on bladed systems, for
example, 5/17-29.
--enable
Enables the autodisable feature on the specified ports.
--disable
Disables the autodisable feature on the specified ports.
--add
Specifies one or more trigger conditions that will disable the specified ports.
Trigger conditions must be separated by a space, for example, LOSN OLS LIP.
Trigger conditions are case insensitive.
--remove
Removes one or more trigger conditions from the port autodisable configuration.
--addall
Adds all supported trigger conditions to the port autodisable configuration.
--removeall
Removes all supported trigger conditions from the port autodisable configuration.
This command removes the triggers only; it does not disable the port autodisable
flag.
--addexcept
Adds all supported trigger conditions to the port autodisable configuration except
the one specified .
--show
Displays the port autodisable configuration.
--suspend
Suspends the current port autodisable configuration temporarily.
--resume
Resumes the suspended port autodisable configuration.
--help
Displays command usage.
option
Specify one or more the following options (supported with the --add, --remove,
and --addexcept operands):
LOSN
Loss of Sync
LOSNG
Loss of Signal
OLS
Offline Primitive Sequence
NOS
Not Operational Primitive Sequence
LIP
Loop Initialization Primitive Sequence