Command Reference Guide

660 Fabric OS Command Reference

53-1002746-01

portCfgCreditRecovery

Enables or disables credit recovery on a port.

SYNOPSIS portcfgcreditrecovery --enable [slot/]port

portcfgcreditrecovery --disable [slot/]port

portcfgcreditrecovery --help [slot/]port

DESCRIPTION Use this command to enable or disable credit recovery on a port.

The credit recovery feature enables credits or frames to be recovered. The default credit recovery

configuration is enabled.

NOTES This command is supported in Access Gateway mode in Fabric OS v7.1.0 and later.

The execution of this command is subject to Virtual Fabric or Admin Domain restrictions that may be in

place. Refer to Chapter 1, "Using Fabric OS Commands" and Appendix A, "Command Availability" for

details.

The Fabric OS port configuration commands are not supported on FCoE ports.

OPERANDS This command has the following operands:

--disable

Disables credit recovery configuration on the specified port.

--enable

Enables credit recovery configuration on the specified port.

--help

Displays the command usage.

EXAMPLES To enable credit recovery on a port:

switch:admin> portcfgcreditrecovery --enable 3/15

To disable credit recovery on a port:

portcfgcreditrecovery --disable 3/15