Command Reference Guide

786 Fabric OS Command Reference
53-1002746-01
portPerfShow
2
-tx -rx
Displays the transmitter and receiver throughput.
-x [hex1 [-hex2]]
Displays a port or a range of ports identified by port numbers, index number in
hexadecimal format. You may specify multiple port ranges separated by a space,
for example, -x 21-26 28-3c.
EXAMPLES To display performance information for all ports at a one second (default) interval:
switch:user> portperfshow
0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
====================================================================
630.4m 0 0 0 0 0 0 0 0 0 630.4m 0 0 0 0 0
16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31
=====================================================================
0 210.1m 840.5m 210.1m 0 0 0 0 0 0 0 0 0 0 0 0
32 33 34 35 36 37 38 39 Total
==============================================
0 0 0 0 0 0 0 0 2.5g
0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
====================================================================
630.4m 0 0 0 0 0 0 0 0 0 630.4m 0 0 0 0 0
16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31
=====================================================================
0 210.1m 840.6m 210.1m 0 0 0 0 0 0 0 0 0 0 0 0
32 33 34 35 36 37 38 39 Total
===============================================
0 0 0 0 0 0 0 0 2.5g
(output stopped)
To display port performance for all ports with an interval of 5 seconds:
switch:user> portperfshow -t 5
0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
====================================================================
630.4m 0 0 0 0 0 0 0 0 112 630.4m 0 0 0 0 0
16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31
====================================================================
0 210.1m 840.6m 210.1m 0 112 0 0 0 0 0 0 0 0 0 0
32 33 34 35 36 37 38 39 Total
==============================================
0 0 0 0 0 0 0 0 2.5g
0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
=====================================================================
630.4m 0 0 0 0 0 0 0 0 0 630.4m 0 0 0 0 0