Command Reference Guide

Fabric OS Command Reference 793
53-1002746-01
portShow
2
portWwn of devices(s) connected
The World Wide Port Names of connected devices.
Distance
The port's long-distance level. In the case of LD mode, the user configured
distance and actual distance also are displayed. See portCfgLongDistance for
information on long distance levels.
Port part of other AD
Yes or No.
portSpeed
The port's fixed speed (1, 2, 4, or 8 Gbps) or negotiated speed (N1 Gbps, N2
Gbps, N4 Gbps, N8 Gbps or AN).
FEC
Forward error correction (FEC) status: displays "active" if FEC is enabled on the
port and the port is online; displays "inactive" if the feature is disabled. Refer to the
portCfgFec command for more information.
LE domain
The LE domain ID.
FC FastWrite
The status of FC FastWrite (ON or OFF) (Deprecated).
If the port is configured as an EX_Port, the following additional port information is displayed:
EX_Port Mode
The port is configured as an EX_Port.
Fabric ID
The fabric ID assigned to this EX_Port; this is the fabric ID of the edge fabric
attached to this EX_Port.
Front Phantom
Information on the front phantom domain presented by this EX_Port. Includes the
preferred (if not active) or actual (if active) domain ID for the front domain and the
WWN of the front domain.
Pr Switch Info
Information on the principal switch of the edge fabric attached to this EX_Port.
Includes the domain ID and WWN of the principal switch.
BB XLate
Information on the xlate (translate) phantom domain presented at this port.
Includes the preferred (if not active) or actual (if active) domain ID for the xlate
phantom domain and the WWN of the xlate phantom domain. The xlate phantom
domain connected at this port is in the same fabric as the router and represents
the edge fabric connected to the EX_Port.
Authentication Type
Displays NONE or DH-CHAP. DH-CHAP is the only authentication type supported
on EX_Ports.
DH Group
Displays DH group [0-4] if DH-CHAP authentication is used. Otherwise displays
N/A.
Hash Algorithm
Displays hash type (MD5 or SHA-1) if DH-CHAP authentication is used.
Otherwise, displays N/A.