Command Reference Guide

936 Fabric OS Command Reference

53-1002746-01

sensorShow

Displays sensor readings.

SYNOPSIS sensorshow

DESCRIPTION Use this command to display the current temperature, fan, and power supply status and readings from

sensors located on the switch. The actual location of the sensors varies, depending on the switch type.

NOTES The execution of this command is subject to Virtual Fabric or Admin Domain restrictions that may be in

place. Refer to Chapter 1, "Using Fabric OS Commands" and Appendix A, "Command Availability" for

details.

OPERANDS None

EXAMPLES To view all sensor values:

switch:admin> sensorshow

sensor 1: (Temperature) is Ok, value is 39 C

sensor 2: (Temperature) is Absent

sensor 3: (Temperature) is Absent

sensor 4: (Temperature) is Absent

sensor 5: (Temperature) is Ok, value is 26 C

sensor 6: (Temperature) is Ok, value is 27 C

sensor 7: (Fan ) is Ok, speed is 2537 RPM

sensor 8: (Fan ) is Ok, speed is 2537 RPM

sensor 9: (Fan ) is Ok, speed is 2556 RPM

sensor 10: (Power Supply ) is Ok

sensor 11: (Power Supply ) is Absent

sensor 12: (Power Supply ) is Ok

sensor 13: (Power Supply ) is Absent