Command Reference Guide

944 Fabric OS Command Reference
53-1002746-01
sfpShow
2
-f
Refreshes the SFP information. This option is valid only when sfpShow is issued
for a specific port.
-all
Displays detailed data for all available SFPs on the switch. This operand is not
compatible with slot/port operands.
-health
Displays SFP health status information from Fabric Watch for 10 Gbps and 16
Gbps SFPs and for 1 6Gbps QSFPs (Quad SFPs). When Fabric Watch
monitoring of SFPs is enabled with the thMonitor command, Fabric Watch
monitors diagnostic SFP parameters such as current, voltage, receiver power,
transmit power, and temperature. When any of these parameters crosses
user-configured low and high thresholds the SFP health state changes Possible
health states include the following:
Green
SPF operates within Fabric Watch thresholds.
Yellow
At least one SFP parameter monitored by Fabric Watch has crossed a low or high
threshold.
No License
The switch does not have a Fabric Watch License
Unknown
This state displays for 8 Gbps, 4 Gbps and 2 Gbps SPF types not supported by
this feature.
Paused
Health monitoring is not enabled on the switch.
EXAMPLES To display SFP information including SFP health parameters on a Brocade DCX 8510-8:
switch:admin> sfpshow -health
Slot 1/Port 0: id
Slot 1/Port 1: id
Slot 1/Port 2: id
Slot 1/Port 3: id
Slot 1/Port 4: id
Slot 1/Port 5: id
Slot 1/Port 6: id
Slot 1/Port 7: id
Slot 1/Port 8: id
Slot 1/Port 9: id
Slot 1/Port 10: id
Slot 1/Port 11: id
Slot 1/Port 12: id
Slot 1/Port 13: id
Slot 1/Port 14: id
Slot 1/Port 15: id
Slot 2/Port 0: id
Slot 2/Port 1: id
Slot 2/Port 2: id
Slot 2/Port 3: id
Slot 2/Port 4: id
Slot 2/Port 5: id
Slot 2/Port 6: id
Slot 2/Port 7: id
Slot 2/Port 8: id