Troubleshooting and Diagnostics Guide

116 Fabric OS Troubleshooting and Diagnostics Guide

53-1002751-01

Automatic trace dump transfers

Saving comprehensive diagnostic files to the server

1. Connect to the switch and log in as admin.

2. Enter the supportSave -c command and respond to the prompts.

switch:admin> supportsave -c

This command will collect RASLOG, TRACE, supportShow, core file, FFDC data

and other support information and then transfer them to a FTP/SCP server

or a USB device. This operation can take several minutes.

NOTE: supportSave will transfer existing trace dump file first, then

automatically generate and transfer latest one. There will be two trace dump

files transfered after this command.

OK to proceed? (yes, y, no, n): [no] y