Quick Reference Guide

980 PowerConnect B-Series TI24X Configuration Guide
53-1002269-02
Displaying port security information
29
The <portnum> parameter is a valid port number.
To display port security statistics for an interface module, enter the following command.
PowerConnect# show port security statistics 7
Module 7:
Total ports: 0
Total MAC address(es): 0
Total violations: 0
Total shutdown ports 0
Syntax: show port security statistics <module>
Displaying restricted MAC addresses on a port
To display a list of restricted MAC addresses on a port, enter a command such as the following.
PowerConnect# show port security e 5 restricted-macs
Syntax: show port security ethernet <portnum> restricted-macs
The <portnum> parameter is a valid port number.
TABLE 156 Output from the show port security statistics <portnum> command
This field... Displays...
Port The port number of the interface.
Total-Addrs The total number of secure MAC addresses on the interface.
Maximum-Addrs The maximum number of secure MAC addresses on the interface.
Violation The number of security violations on the port.
Shutdown/Time-Left Whether the port has been shut down due to a security violation and the
number of seconds before it is enabled again.
TABLE 157 Output from the show port security statistics <module> command
This field... Displays...
Total ports The number of ports on the module.
Total MAC address(es) The total number of secure MAC addresses on the module.
Total violations The number of security violations encountered on the module.
Total shutdown ports The number of ports on the module shut down as a result of security violations.