Manualshelf

Quick Reference Guide

ManualsBrandsDell ManualsComputer equipmentPowerConnect B-TI24x
1031103210331034103510361037103810391040
998 PowerConnect B-Series TI24X Configuration Guide
53-1002269-02
Displaying multi-device port authentication information
30
Displaying multi-device port authentication configuration
information
To display information about the multi-device port authentication configuration, enter the following
command.
Syntax: show auth-mac-address configuration
The following table describes the output from the show auth-mac-address configuration command.
Displaying multi-device port authentication information
for a specific MAC address or port
To display authentication information for a specific MAC address or port, enter a command such as
the following.
Accepted MACs The number of MAC addresses that have been successfully authenticated
Rejected MACs The number of MAC addresses for which authentication has failed.
Attempted-MACs The rate at which authentication attempts are made for MAC addresses.
TABLE 160 Output from the show authenticated-mac-address configuration command
This field... Displays...
Feature enabled Whether multi-device port authentication is enabled on the device.
Number of Ports enabled The number of ports on which the multi-device port authentication feature is
enabled.
Port Information for each multi-device port authentication-enabled port.
Fail-Action What happens to traffic from a MAC address for which RADIUS authentication has
failed either block the traffic or assign the MAC address to a restricted VLAN.
Fail-vlan The restricted VLAN to which non-authenticated MAC addresses are assigned, if the
Fail-Action is to assign the MAC address to a restricted VLAN.
Dyn-vlan Whether RADIUS dynamic VLAN assignment is enabled for the port.
MAC-filter Whether a MAC filter has been applied to specify pre-authenticated MAC addresses.
TABLE 159 Output from the show authenticated-mac-address command (Continued)
This field... Displays...