Manualshelf

Quick Reference Guide

ManualsBrandsDell ManualsComputer equipmentPowerConnect B-TI24x
1061106210631064106510661067106810691070
PowerConnect B-Series TI24X Configuration Guide 1029
53-1002269-02
Using FDP
33
This example shows information for Ethernet port 3. The port sends FDP updates every 5 seconds.
Neighbors that receive the updates can hold them for up to 180 seconds before discarding them.
Syntax: show fdp interface [ethernet <portnum>]
The ethernet <portnum> parameter lists the information only for the specified interface.
Displaying FDP and CDP statistics
To display FDP and CDP packet statistics, enter the following command.
Syntax: show fdp traffic
Clearing FDP and CDP information
You can clear the following FDP and CDP information:
• Information received in FDP and CDP updates
• FDP and CDP statistics
The same commands clear information for both FDP and CDP.
Clearing FDP and CDP neighbor information
To clear the information received in FDP and CDP updates from neighboring devices, enter the
following command.
PowerConnect# clear fdp table
Syntax: clear fdp table
NOTE
This command clears all the updates for FDP and CDP.
Clearing FDP and CDP statistics
To clear FDP and CDP statistics, enter the following command.
PowerConnect# clear fdp counters
Syntax: clear fdp counters