Manualshelf

Quick Reference Guide

ManualsBrandsDell ManualsComputer equipmentPowerConnect B-TI24x
1101110211031104110511061107110811091110
1070 PowerConnect B-Series TI24X Configuration Guide
53-1002269-02
Basic management
A
Syntax: show <option>
You also can enter “show” at the command prompt, then press the TAB key.
Viewing port statistics
Port statistics are polled by default every 10 seconds.
You can view statistics for ports by entering the following show commands:
• show interfaces
• show configuration
• show statistics
To display the statistics, enter a command such as the following.
Syntax: show statistics [ethernet <portnum>]
The portnum parameter is a valid port number.
Table 169 lists the statistics displayed in the output of the show statistics command.
TABLE 169 Port statistics
This line... Displays...
Port configuration
Port The port number.
Link The link state.
State The STP state.
Dupl The mode (full-duplex or half-duplex).
Speed The port speed (10M, 100M, or 1000M).