Quick Reference Guide

200 PowerConnect B-Series TI24X Configuration Guide
53-1002269-02
Metro Ring Protocol (MRP)
8
MRP rings with shared interfaces (MRP Phase 2)
With MRP Phase 2, MRP rings can be configured to share the same interfaces as long as the
interfaces belong to the same VLAN. Figure 35 shows examples of multiple MRP rings that share
the same interface.
FIGURE 35 Examples of multiple rings sharing the same interface - MRP Phase 2
On each node that will participate in the ring, you specify the ring ID and the interfaces that will be
used for ring traffic. In a multiple ring configuration, a ring ID determines its priority. The lower the
ring ID, the higher priority of a ring.
A ring ID is also used to identify the interfaces that belong to a ring.
Example 1 Example 2
Ring 1
Ring 2
Port1
VLAN 2
Port2
VLAN 2
S1
S2
Ring 1 Ring 2
Port1
VLAN 2
Port2
VLAN 2
S2
S1
S4
S3
Ring 3