Quick Reference Guide

308 PowerConnect B-Series TI24X Configuration Guide
53-1002269-02
Displaying VLAN information
10
Displaying system-wide VLAN information
Use the show vlans command to display VLAN information for all the VLANs configured on the
device.
The following example shows the display output for a PowerConnect B-Series TI24X device.
Ports that are tagged but are not dual-mode ports are listed as tagged ports. In the following
example display output, ports 7and 8 are dual-mode ports in port-based VLAN 4. Ports 7 and 8
also belong to port-based VLAN 3, but they are tagged ports only in VLAN 3 and are not configured
as dual-mode ports.
PowerConnect# show run
Current configuration:
!
ver 4.2.00b
!
!
global-stp
!
trunk ethe 1 to 2
trunk ethe 9 ethe 13
config-trunk-ind
disable ethe 13
!
vlan 202 by port
tagged ethe 5 to 6
router-interface ve 22
!
vlan 203 by port
tagged ethe 5 to 6
router-interface ve 23
!
vlan 204 by port
tagged ethe 5 to 6
router-interface ve 24
!
vlan 205 by port
tagged ethe 5 to 6
router-interface ve 25
!
PowerConnect# show vlans
Total PORT-VLAN entries: 2
Maximum PORT-VLAN entries: 8
legend: [S=Slot]
PORT-VLAN 1, Name DEFAULT-VLAN, Priority level0, Spanning tree Off
Untagged Ports: (S2) 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16
Untagged Ports: (S2) 17 18 19 20 21 22 23 24
Untagged Ports: (S4) 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16
Untagged Ports: (S4) 17 18 19 20 21 22 23 24
Tagged Ports: None
PORT-VLAN 10, Name IP_VLAN, Priority level0, Spanning tree Off
Untagged Ports: (S1) 1 2 3 4 5 6
Tagged Ports: None