Quick Reference Guide

456 PowerConnect B-Series TI24X Configuration Guide
53-1002269-02
IGMP snooping show commands
18
Syntax: show ip multicast error
The following table describes the output from the show ip multicast error command.
Displaying IGMP group information
To display information about IGMP groups, enter the following command.
In this example, an IGMP V2 group is in EXCLUDE mode with a source of 0. The group only excludes
traffic from the 0 (zero) source list, which actually means that all traffic sources are included.
To display detailed IGMP group information for a specific group, enter the following command.
If the tracking and fast leave features are enabled, you can display the list of clients that belong to
a particular group by entering the following command.
Syntax: show ip multicast group [<group-address> [detail] [tracking]]
Table 0.3:
This field Displays
SW processed pkt The number of multicast packets processed by IGMP snooping.
up-time The time since the IGMP snooping is enabled.