Quick Reference Guide

542 PowerConnect B-Series TI24X Configuration Guide
53-1002269-02
General operating principles
20
Devices use chassis ID subtype 4, the base MAC address of the device. Other third party devices
may use a chassis ID subtype other than 4. The chassis ID will appear similar to the following on
the remote device, and in the CLI display output on the device (show lldp local-info).
Chassis ID (MAC address): 0012.f233.e2c0
The chassis ID TLV is always the first TLV in the LLDPDU.
Port ID
The Port ID identifies the port from which LLDP packets were sent.
There are several ways in which a port may be identified, as shown in Figure 94. A port ID subtype,
included in the TLV, indicates how the port is being referenced in the Port ID field.
Devices use port ID subtype 3, the permanent MAC address associated with the port. Other third
party devices may use a port ID subtype other than 3. The port ID appears similar to the following
on the remote device, and in the CLI display output on the device (show lldp local-info).
Port ID (MAC address): 0012.f233.e2d3
The LLDPDU format is shown in “LLDPDU packet format” on page 540.
The Port ID TLV format is shown below.
FIGURE 95 Port ID TLV packet format
3Port component
4MAC address
5Network address
6Interface name
7 Locally assigned
8 – 255 Reserved
TABLE 94 Port ID subtypes
ID subtype Description
0Reserved
1Interface alias
2Port component
3MAC address
4Network address
5Interface name
6 Agent circuit ID
7 Locally assigned
8 – 255 Reserved
TABLE 93 Chassis ID subtypes
ID subtype Description