Manualshelf

Quick Reference Guide

ManualsBrandsDell ManualsComputer equipmentPowerConnect B-TI24x
581582583584585586587588589590
PowerConnect B-Series TI24X Configuration Guide 555
53-1002269-02
Configuring LLDP
20
Maximum frame size: 1522 octets
Syntax: [no] lldp advertise max-frame-size ports ethernet <port-list> | all
Displaying LLDP statistics and configuration settings
You can use the following CLI show commands to display information about LLDP settings and
statistics:
• show lldp – Displays a summary of the LLDP configuration settings.
• show lldp statistics – Displays LLDP global and per-port statistics.
• show lldp neighbors – Displays a list of the current LLDP neighbors.
• show lldp neighbors detail – Displays the details of the latest advertisements received from
LLDP neighbors.
• show lldp local-info – Displays the details of the LLDP advertisements that will be transmitted
on each port.
This above show commands are described in this section.
LLDP configuration summary
To display a summary of the LLDP configuration settings on the device, enter the show lldp
command at any level of the CLI.
The following shows an example report.
Syntax: show lldp
The following table describes the information displayed by the show lldp statistics command.
Table 2:
This field... Displays...
LLDP transmit interval The number of seconds between regular LLDP packet transmissions.
LLDP transmit hold
multiplier
The multiplier used to compute the actual time-to-live (TTL) value of an LLDP
advertisement. The TTL value is the transmit interval multiplied by the transmit hold
multiplier.
LLDP transmit delay The number of seconds the LLDP agent will wait after transmitting an LLDP frame and
before transmitting another LLDP frame.
LLDP SNMP notification
interval
The number of seconds between transmission of SNMP LLDP traps
(lldpRemTablesChange) and SNMP LLDP-MED traps
(lldpXMedTopologyChangeDetected).