Manualshelf

Quick Reference Guide

ManualsBrandsDell ManualsComputer equipmentPowerConnect B-TI24x
591592593594595596597598599600
PowerConnect B-Series TI24X Configuration Guide 561
53-1002269-02
Resetting LLDP statistics
20
NOTE
The contents of the show output will vary depending on which TLVs are configured to be advertised.
A backslash (\) at the end of a line indicates that the text continues on the next line.
The fields in the below outputs are described in the individual TLV advertisement sections in this
chapter.
Resetting LLDP statistics
To reset LLDP statistics, enter the clear lldp statistics command at the Global CONFIG level of the
CLI. The device will clear the global and per-port LLDP neighbor statistics on the device (refer to
“LLDP statistics” on page 556).
PowerConnect# clear lldp statistics
Syntax: clear lldp statistics [ports ethernet <port-list> | all]
If you do not specify any ports or use the keyword all, by default, the system will clear lldp statistics
on all ports.
Clearing cached LLDP neighbor information
The device clears cached LLDP neighbor information after a port becomes disabled and the LLDP
neighbor information ages out. However, if a port is disabled then re-enabled before the neighbor
information ages out, the device will clear the cached LLDP neighbor information when the port is
re-enabled.
If desired, you can manually clear the cache. For example, to clear the cached LLDP neighbor
information for port e 20, enter the following command at the Global CONFIG level of the CLI.
PowerConnect#clear lldp neighbors ports e 20
Syntax: clear lldp neighbors [ports ethernet <port-list> | all]