Manualshelf

Quick Reference Guide

ManualsBrandsDell ManualsComputer equipmentPowerConnect B-TI24x
671672673674675676677678679680
638 PowerConnect B-Series TI24X Configuration Guide
53-1002269-02
Displaying IP configuration information and statistics
21
Syntax: show ip
This display shows the following information.
Displaying ARP entries
To display the entries the Layer 2 Switch has placed in its ARP cache, enter the following command
from any level of the CLI.
Syntax: show arp
This display shows the following information.
TABLE 108 CLI display of global IP configuration information – Layer 2 Switch
This field... Displays...
IP configuration
Switch IP address The management IP address configured on the Layer 2 Switch. Specify this
address for Telnet.
Subnet mask The subnet mask for the management IP address.
Default router address The address of the default gateway, if you specified one.
Most recent TFTP access
TFTP server address The IP address of the most-recently contacted TFTP server, if the switch has
contacted a TFTP server since the last time the software was reloaded or the
switch was rebooted.
Configuration filename The name under which the Layer 2 Switch startup-config file was uploaded or
downloaded during the most recent TFTP access.
Image filename The name of the Layer 2 Switch flash image (system software file) that was
uploaded or downloaded during the most recent TFTP access.