Quick Reference Guide

PowerConnect B-Series TI24X Configuration Guide 709

53-1002269-02

Displaying OSPF information

Syntax: show ip ospf border-routers [<ip-addr>]

The <ip-addr> parameter displays the ABR and ASBR entries for the specified IP address.

Displaying OSPF trap status

All traps are enabled by default when you enable OSPF. To disable or re-enable an OSPF trap, refer

to “Modify OSPF traps generated” on page 693.

To display the state of each OSPF trap, enter the following command at any CLI level.

Syntax: show ip ospf trap

PowerConnect# show ip ospf trap

Interface State Change Trap: Enabled

Virtual Interface State Change Trap: Enabled

Neighbor State Change Trap: Enabled

Virtual Neighbor State Change Trap: Enabled

Interface Configuration Error Trap: Enabled

Virtual Interface Configuration Error Trap: Enabled

Interface Authentication Failure Trap: Enabled

Virtual Interface Authentication Failure Trap: Enabled

Interface Receive Bad Packet Trap: Enabled

Virtual Interface Receive Bad Packet Trap: Enabled

Interface Retransmit Packet Trap: Enabled

Virtual Interface Retransmit Packet Trap: Enabled

Originate LSA Trap: Enabled

Originate MaxAge LSA Trap: Enabled

Link State Database Overflow Trap: Enabled

Link State Database Approaching Overflow Trap: Enabled