Quick Reference Guide

734 PowerConnect B-Series TI24X Configuration Guide
53-1002269-02
Displaying VRRP and VRRPE information
24
Displaying detailed information
To display detailed VRRP or VRRPE information, enter the following command at any level of the
CLI.
This example is for a VRRP Owner. Here is an example for a VRRP Backup.
Here is an example for a VRRPE Backup.
PowerConnect# show ip vrrp
Total number of VRRP routers defined: 1
Interface ethernet 6
auth-type no authentication
VRID 1
state master
administrative-status enabled
mode owner
priority 255
current priority 255
hello-interval 10000 msec
advertise backup: disabled
track-port 4
PowerConnect# show ip vrrp
Total number of VRRP routers defined: 1
Interface ethernet 5
auth-type no authentication
VRID 1
state backup
administrative-status enabled
mode non-owner(backup)
priority 100
current priority 100
hello-interval 10000 msec
dead-interval 30000 msec
current dead-interval 10000 msec
preempt-mode true
advertise backup: enabled
backup router 192.53.5.3 expires in 00:00:03.0
next hello sent in 00:00:02.0
track-port 2