Quick Reference Guide

52 PowerConnect B-Series TI24X Configuration Guide
53-1002269-02
Diagnostic error codes and remedies for TFTP transfers
3
6 TFTP out of buffer space. The file is larger than the amount of room on the device or TFTP server.
If you are copying an image file to flash, first copy the other image to
your TFTP server, then delete it from flash. (Use the erase flash... CLI
command at the Privileged EXEC level to erase the image in the flash.)
If you are copying a configuration file to flash, edit the file to remove
unneeded information, then try again.
7 TFTP busy, only one TFTP
session can be active.
Another TFTP transfer is active on another CLI session or Brocade
Network Advisor session. Wait, then retry the transfer.
8 File type check failed. You accidentally attempted to copy the incorrect image code into the
system.
Retry the transfer using the correct image.
16 TFTP remote - general error. The TFTP configuration has an error. The specific error message
describes the error.
Correct the error, then retry the transfer.
17 TFTP remote - no such file.
18 TFTP remote - access violation.
19 TFTP remote - disk full.
20 TFTP remote - illegal operation.
21 TFTP remote - unknown
transfer ID.
22 TFTP remote - file already
exists.
23 TFTP remote - no such user.
Table 0.1:
Error
code
Message Explanation and action