Quick Reference Guide

54 PowerConnect B-Series TI24X Configuration Guide
53-1002269-02
Digital optical monitoring
4
• E1MG-100BXD
• E1MG-BXU
• E1MG-BXD
Supported media
Digital optical monitoring is supported with the following Dell-qualified media types:
• 1000Base-BX-D
• 1000Base-BX-U
• 1000Base-LHA
• 1000Base-LHB
• 1000Base-LX
• 1000Base-SX
• 1000Base-SX 2
Media not supported
Digital optical monitoring is not supported for the following optics:
• E1MG-100BXU
• E1MG-100BXD
• E1MG-BXU
• E1MG-BXD
Configuration limitations
A device can monitor a maximum of 24 SFPs and 12 XFPs.
Enabling digital optical monitoring
To enable optical monitoring on all Dell-qualified optics installed in the device, use the following
command.
PowerConnect(config)# optical-monitor
To enable optical monitoring on a specific port, use the following command.
PowerConnect(config)# interface ethernet 1
PowerConnect(config-if-e10000-1)# optical-monitor
To enable optical monitoring on a range of ports, use the following command.
PowerConnect(config)# interface ethernet 1 to 12
PowerConnect(config-mif-e10000-1-12)# optical-monitor
Syntax: [no] optical-monitor
Use the no form of the command to disable digital optical monitoring.