Manualshelf

Quick Reference Guide

ManualsBrandsDell ManualsComputer equipmentPowerConnect B-TI24x
9919929939949959969979989991000
958 PowerConnect B-Series TI24X Configuration Guide
53-1002269-02
Displaying 802.1X information
28
If the VLAN name supplied by the RADIUS server corresponds to a statically configured VLAN,
the output indicates that the port is a member of the VLAN to which it was dynamically
assigned through 802.1X. If you then enter the write memory command, the VLAN to which
the port is currently assigned becomes the port default VLAN in the device configuration.
Displaying information about dynamically applied
MAC filters and IP ACLs
You can display information about currently active user-defined and dynamically applied MAC filters
and IP ACLs.
Displaying user-defined MAC filters and IP ACLs
To display the user-defined MAC filters active on the device, enter the following command.
PowerConnect# show dot1x mac-address filter
Port 3 (User defined MAC Address Filter) :
mac filter 1 permit any any
Syntax: show dot1x mac-address-filter
To display the user-defined IP ACLs active on the device, enter the following command.
Syntax: show dot1x ip-ACL
Displaying dynamically applied MAC filters and IP ACLs
To display the dynamically applied MAC address filters active on an interface, enter a command
such as the following.
Syntax: show dot1x mac-address-filter all | ethernet <portnum>
The all keyword displays all dynamically applied MAC address filters active on the device.
The <portnum> parameter is a valid port number.
To display the dynamically applied IP ACLs active on an interface, enter a command such as the
following.