Manualshelf

Quick Reference Guide

ManualsBrandsDell ManualsComputer equipmentPowerConnect B-TI24x
9919929939949959969979989991000
PowerConnect B-Series TI24X Configuration Guide 961
53-1002269-02
Displaying 802.1X information
28
Displaying information about the dot1x MAC sessions on each port
The show dot1x mac-session command displays information about the dot1x-mac-sessions on
each port on the device.The output also shows the authenticator PAE state.
Example
Syntax: show dot1x mac-session
Table 151 lists the new fields in the display.
Original PVID The originally configured (not dynamically assigned) PVID for the port.
PVID mac total The number of devices transmitting untagged traffic on the port PVID.
PVID mac authorized The number of devices transmitting untagged traffic on the port PVID as a result of
dynamic VLAN assignment.
num mac sessions The number of dot1x-mac-sessions on the port.
num mac authorized The number of authorized dot1x-mac-sessions on the port.
TABLE 151 Output from the show dot1x mac-session command
This field... Displays...
Port The port on which the dot1x-mac-session exists.
MAC/ (username) The MAC address of the Client and the username used for RADIUS authentication.
Vlan The VLAN to which the port is currently assigned.
Auth-State The authentication state of the dot1x-mac-session. This can be one of the following
permit – The Client has been successfully authenticated, and traffic from the Client is
being forwarded normally.
blocked – Authentication failed for the Client, and traffic from the Client is being
dropped in hardware.
restricted – Authentication failed for the Client, but traffic from the Client is allowed in
the restricted VLAN only.
init - The Client is in is in the process of 802.1X authentication, or has not started the
authentication process.
TABLE 150 Output from the show dot1x config command (Continued)
This field... Displays...