Setup Guide

入門指南 53
步驟 4：
Finally, setup the default gateway. Please enter the IP address of
the gateway from which this network is reachable. [0.0.0.0]:
( 最後設定預設閘道。請輸入網路可達的閘道之 IP 位址。[0.0.0.0]:)
This is the configuration information that has been collected:
( 以下是已收集的組態資訊：)
User Account setup ( 使用者帳戶設定 ) = root
Password = ******** ( 密碼 = ********)
Management IP address = 192.168.2.1 255.255.255.0 ( 管理 IP 位址 =
192.168.2.1 255.255.255.0)
Default Gateway = 0.0.0.0 ( 預設閘道 = 0.0.0.0)
步驟 5：
Do you want to select the operational mode as Simple Mode? ( 要選擇
作業模式為簡單模式嗎？ [Y/N] n)
步驟 6：
If the information is correct, please select (Y) to save the
configuration, and copy to the start-up configuration file. If the
information is incorrect, select (N) to discard configuration and
restart the wizard: [Y/N] ( 如果資訊正確，請選擇 (Y) 儲存組態，並且複製到
啟動組態檔。如果資訊不正確，請選擇 (N) 捨棄組態並重新啟動精靈：[Y/N]) y
Thank you for using Dell Easy Set up Wizard. You will now enter CLI
mode. ( 謝謝使用 Dell 簡易設定精靈。您即將進入 CLI 模式。)