Reference Guide Dell Networking W-Series Instant 6.4.0.2-4.
Copyright © 2014 Aruba Networks, Inc. Aruba Networks trademarks include , Aruba Networks®, Aruba ® Wireless Networks , the registered Aruba the Mobile Edge Company logo, and Aruba Mobility Management System®. Dell™, the DELL™ logo, and PowerConnect™ are trademarks of Dell Inc. All rights reserved. Specifications in this manual are subject to change without notice. Originated in the USA. All other trademarks are the property of their respective owners.
Contents Contents 3 About this Guide 20 Intended Audience 20 Related Documents 20 Conventions 20 What is New in this Release 21 Contacting Dell 21 MIBs Overview 22 MIBs 22 SNMP 23 Using MIBs 25 Downloading MIB Files 25 Reporting WLAN Health 25 SNMP Operations on W-IAPs 25 MIB Browsers 26 Reading MIB Files 26 Opening Line 27 Imports 27 Inheritance 27 Identity 28 MIB Modules 28 Group 28 Table 28 Entry 28 Closing Line 29 SNMP File 29 HP OpenView 29 Dell Ne
Instant MIBs 30 aiInfoGroup 31 aiVirtualControllerKey 31 aiVirtualControllerName 32 aiVirtualControllerOrganization 32 aiVirtualControllerVersion 32 aiVirtualControllerIPAddress 32 aiMasterIPAddress 33 aiStateGroup aiAccessPointTable 4 | Contents 33 33 aiAccessPointEntry 34 aiAPMACAddress 34 aiAPName 34 aiAPIPAddress 34 aiAPSerialNum 34 aiAPModel 35 aiAPModelName 35 aiAPCPUUtilization 35 aiAPMemoryFree 35 aiAPUptime 35 aiAPTotalMemory 36 aiAPStatus 36 aiRadioTable
aiRadioTxTotalFrames 39 aiRadioTxMgmtFrames 39 aiRadioTxDataFrames 39 aiRadioTxDataBytes 39 aiRadioTxDrops 39 aiRadioRxTotalFrames 40 aiRadioRxDataFrames 40 aiRadioRxDataBytes 40 aiRadioRxMgmtFrames 40 aiRadioRxBad 40 aiRadioPhyEvents 41 aiRadioStatus 41 aiWlanTable 41 aiWlanEntry 42 aiWlanAPMACAddress 42 aiWlanIndex 42 aiWlanESSID 42 aiWlanMACAddress 42 aiWlanTxTotalFrames 43 aiWlanTxDataFrames 43 aiWlanTxDataBytes 43 aiWlanRxTotalFrames 43 aiWlanRxDataFrames 43
aiClientSNR 46 aiClientTxDataFrames 46 aiClientTxDataBytes 46 aiClientTxRetries 47 aiClientTxRate 47 aiClientRxDataFrames 47 aiClientRxDataBytes 47 aiClientRxRetries 47 aiClientRxRate 48 aiClientUptime 48 Standard SNMP MIBs 49 System MIB 49 sysDescr 50 sysObjectID 50 sysUpTime 50 sysName 50 sysLocation 51 sysServices 51 dot1qTpFdbTable 51 dot1qFdbId 51 dot1qTpFdbAddress 52 dot1qTpFdbPort 52 dot1qTpFdbStatus 52 ifTable 6 | Contents 52 ifIndex 53 ifDescr 53
ifInOctets 55 ifInUcastPkts 55 ifInNUcastPkts 56 ifInDiscards 56 ifInErrors 56 ifOutOctets 56 ifOutUcastPkts 57 ifOutDiscards 57 ifOutErrors 57 ifXTable 57 ifName 58 ifInMulticastPkts 58 ifInBroadcastPkts 58 ifOutMulticastPkts 59 ifOutBroadcastPkts 59 ifHCInOctets 59 ifHCInUcastPkts 59 ifHCInMulticastPkts 60 ifHCInBroadcastPkts 60 ifHCOutOctets 60 ifHCOutUcastPkts 61 ifHCOutMulticastPkts 61 ifHCOutBroadcastPkts 61 ifLinkUpDownTrapEnable 62 ifPromiscuousMode 6
| Contents wlsxTrapTargetAPBSSID 69 wlsxTrapTargetAPSSID 69 wlsxTrapTargetAPChannel 69 wlsxTrapNodeMac 70 wlsxTrapSourceMac 70 wlsxReceiverMac 70 wlsxTrapTransmitterMac 70 wlsxTrapReceiverMac 70 wlsxTrapSnr 71 wlsxTrapSignatureName 71 wlsxTrapFrameType 71 wlsxTrapAddressType 71 wlsxTrapAPLocation 71 wlsxTrapAPChannel 72 wlsxTrapAPTxPower 72 wlsxTrapMatchedMac 72 wlsxTrapMatchedIp 72 wlsxTrapRogueIfoURL 72 wlsxTrapVLANId 73 wlsxTrapAdminStatus 73 wlsxTrapOperStatus
wlsxTrapSpoofedNewPhyAddress 75 wlsxTrapDBName 76 wlsxTrapDBUserName 76 wlsxTrapDBIpAddress 76 wlsxTrapDBType 76 wlsxTrapVrrpID 76 wlsxTrapVrrpMasterIp 77 wlsxTrapVrrpOperState 77 wlsxTrapESIServerGrpName 77 wlsxTrapESIServerName 77 wlsxTrapESIServerIpAddress 77 wlsxTrapLicenseDaysRemaining 78 wlsxTrapSwitchIp 78 wlsxTrapSwitchRole 78 wlsxTrapUserIpAddress 78 wlsxTrapUserPhyAddress 78 wlsxTrapUserName 79 wlsxTrapUserRole 79 wlsxTrapUserAuthenticationMethod 79 wlsxTrapAP
| Contents wlsxTrapTableEntryChangeType 82 wlsxTrapGlobalConfigObj 82 wlsxTrapTableGenNumber 82 wlsxTrapLicenseId 82 wlsxTrapConfidenceLevel 83 wlsxTrapMissingLicenses 83 wlsxVoiceCurrentNumCdr 83 wlsxTrapTunnelId 83 wlsxTrapTunnelStatus 83 wlsxTrapTunnelUpReason 84 wlsxTrapTunnelDownReason 84 wlsxTrapApSerialNumber 84 wlsxTraptimeStr 84 wlsxTrapMasterIp 84 wlsxTrapLocaIIp 85 wlsxTrapMasterName 85 wlsxTrapLocalName 85 wlsxTrapPrimaryControllerIp 85 wlsxTrapBackupContr
wlsxTrapAPARMChangeReason 88 wlsxTrapAPChannelSec 88 wlsxTrapUserAttributeChangeType 89 wlsxTrapAPControllerIp 89 wlsxTrapApMasterStatus 89 wlsxTrapCaName 89 wlsxTrapCrlName 89 wlsxTrapCount 90 wlsxTrapAPPreviousUplinkType 90 wlsxTrapAPPreviousUplinkActiveTime 90 wlsxTrapAPActiveUplinkType 90 wlsxTrapAPUplinkChangeReason 90 wlsxTrapAPManagedModeConfigFailure 91 ai Traps Objects Group 91 wlsxTrapAPMacAddress 95 wlsxTrapAPIpAddress 95 wlsxTrapAPBSSID 95 wlsxTrapEssid 96 wls
| Contents wlsxTrapAPTxPower 99 wlsxTrapMatchedMac 99 wlsxTrapMatchedIp 99 wlsxTrapRogueIfoURL 99 wlsxTrapVLANId 100 wlsxTrapAdminStatus 100 wlsxTrapOperStatus 100 wlsxTrapAuthServerName 100 wlsxTrapAuthServerTimeout 100 wlsxTrapCardSlot 101 wlsxTrapTemperatureValue 101 wlsxTrapProcessName 101 wlsxTrapFanNumber 101 wlsxTrapVoltageType 101 wlsxTrapVoltageValue 102 wlsxTrapStationBlackListReason 102 wlsxTrapSpoofedIpAddress 102 wlsxTrapSpoofedOldPhyAddress 102 wlsxTrapS
wlsxTrapUserIpAddress 105 wlsxTrapUserPhyAddress 105 wlsxTrapUserName 106 wlsxTrapUserRole 106 wlsxTrapUserAuthenticationMethod 106 wlsxTrapAPRadioNumber 106 wlsxTrapRogueInfoURL 106 wlsxTrapInterferingAPInfoURL 107 wlsxTrapPortNumber 107 wlsxTrapTime 107 wlsxTrapHostIp 107 wlsxTrapHostPort 107 wlsxTrapConfigurationId 108 wlsxTrapCTSURL 108 wlsxTrapCTSTransferType 108 wlsxTrapConfigurationState 108 wlsxTrapUpdateFailureReason 108 wlsxTrapUpdateFailedObj 109 wlsxTrapTableE
wlsxTrapLocaIIp 112 wlsxTrapMasterName 112 wlsxTrapLocalName 112 wlsxTrapPrimaryControllerIp 112 wlsxTrapBackupControllerIp 112 wlsxTrapSpoofedFrameType 113 wlsxTrapAssociationType 113 wlsxTrapDeviceIpAddress 113 wlsxTrapDeviceMac 113 wlsxTrapVcIpAddress 113 wlsxTrapVcMacAddress 114 wlsxTrapAPName 114 wlsxTrapApMode 114 wlsxTrapAPPrevChannel 114 wlsxTrapAPPrevChannelSec 114 wlsxTrapAPPrevTxPower 115 wlsxTrapAPCurMode 115 wlsxTrapAPPrevMode 115 wlsxTrapAPARMChangeReason 1
wlsxNUserEntryCreated 124 wlsxNUserEntryDeleted 124 wlsxNUserEntryAuthenticated 124 wlsxNUserEntryDeAuthenticated 124 wlsxNUserAuthenticationFailed 125 wlsxNAuthServerReqTimedOut 125 wlsxNAuthServerTimedOut 125 wlsxNAuthServerIsUp 125 wlsxNAccessPointIsUp 125 wlsxNChannelChanged 126 wlsxNStationAddedToBlackList 126 wlsxNStationRemovedFromBlackList 126 wlsxNRadioAttributesChanged 126 wlsxUnsecureAPDetected 126 wlsxUnsecureAPResolved 127 wlsxStaImpersonation 127 wlsxReservedCha
| Contents wlsxStaInterferenceDetected 130 wlsxStaInterferenceCleared 130 wlsxFrameRetryRateExceeded 131 wlsxFrameReceiveErrorRateExceeded 131 wlsxFrameFragmentationRateExceeded 131 wlsxFrameBandWidthRateExceeded 131 wlsxFrameLowSpeedRateExceeded 131 wlsxFrameNonUnicastRateExceeded 132 wlsxLoadbalancingEnabled 132 wlsxLoadbalancingDisabled 132 wlsxChannelFrameRetryRateExceeded 132 wlsxChannelFrameFragmentationRateExceeded 132 wlsxChannelFrameErrorRateExceeded 133 wlsxSignatureM
wlsxStaAssociatedToUnsecureAP 137 wlsxStaUnAssociatedFromUnsecureAP 137 wlsxAdhocNetworkBridgeDetected 138 wlsxInterferingApDetected 138 wlsxColdStart 138 wlsxWarmStart 138 wlsxAPImpersonation 138 wlsxNAuthServerIsDown 139 wlsxWindowsBridgeDetected 139 wlsxSignAPNetstumbler 139 wlsxSignStaNetstumbler 139 wlsxSignAPAsleap 139 wlsxSignStaAsleap 140 wlsxSignAPAirjack 140 wlsxSignStaAirjack 140 wlsxSignAPNullProbeResp 140 wlsxSignStaNullProbeResp 140 wlsxSignAPDeauthBcast 141
| Contents wlsxMalformedHTIEDetected 147 wlsxMalformedAssocReqDetected 147 wlsxOverflowIEDetected 147 wlsxOverflowEAPOLKeyDetected 148 wlsxMalformedFrameLargeDurationDetected 148 wlsxMalformedFrameWrongChannelDetected 148 wlsxMalformedAuthFrame 148 wlsxCTSRateAnomaly 148 wlsxRTSRateAnomaly 149 wlsxNRogueAPDetected 149 wlsxNRogueAPResolved 149 wlsxNeighborAPDetected 149 wlsxNInterferingAPDetected 149 wlsxNSuspectRogueAPDetected 150 wlsxNSuspectRogueAPResolved 150 wlsxBlockAc
wlsxAPChannelChange 154 wlsxAPPowerChange 154 wlsxAPModeChange 155 wlsxUserEntryAttributesChanged 155 wlsxNAPMasterStatusChange 155 wlsxNAdhocUsingValidSSID 155 wlsxMgmtUserAuthenticationFailed 156 SNMP Traps 156 linkDown 156 linkUp 156 Dell Networking W-Series Instant 6.4.0.2-4.
Chapter 1 About this Guide This guide provides information on Management Information Base (MIBs) supported in Dell Networking W-Series Instant 6.4.0.2-4.1 software release. Intended Audience This manual is intended for network administrators and operators responsible for managing the Dell Networking WSeries Instant Access Point (W-IAP).
Type Style Description In the command examples, italicized text within angle brackets represents items that you should replace with information appropriate to your specific situation. For example: # send In this example, you would type “send” at the system prompt exactly as shown, followed by the text of the message you wish to send. Do not type the angle brackets. [Optional] Command examples enclosed in brackets are optional. Do not type the brackets.
Chapter 2 MIBs Overview This chapter provides information about Management Information Base (MIBs) supported in Dell Networking WSeries Instant 6.4.0.2-4.1 software release. MIBs A MIB is a virtual database that contains information used for network management. Each managed device contains MIBs that define its properties. A separate MIB is provided for each defined property, such as the group of physical ports assigned to a VLAN or the statistical data of packets transferred at a specific rate.
Table 4 indicates the numerical string that lists the nodes of the enterprise MIB hierarchy. Table 4: MIB Node Identification - Enterprise Nodes Name 1 1 OSI 3 1.3 ORG 6 1.3.6 DOD 1 1.3.6.1 Internet 4 1.3.6.1.4 Private 1 1.3.6.1.4.1 Enterprise 674 1.3.6.1.4.1.674 Dell The information provided by a MIB is a file that describes network elements with numerical strings. This information is compiled into readable text by the SNMP manager.
Table 5: MIB Keywords Keyword Description Sequence Refers to the sequence of objects of the MIB. This keyword is used with entry MIB objects to list the MIB objects that exchange information. Syntax Textual conventions, for example, Integer32.
Chapter 3 Using MIBs This chapter provides information on using MIBs. l Downloading MIB Files on page 25 l Reporting WLAN Health on page 25 l Reading MIB Files on page 26 l SNMP File on page 29 l HP OpenView on page 29 Downloading MIB Files The latest Instant MIB files are available for registered customers at download.dell-pcw.com. For assistance to set up an account and access files, contact customer service. See Contacting Dell on page 21.
MIB Browsers The following is an example of snmpget command to obtain information. Figure 2 shows how information may be obtained through a graphical user interface (GUI). The user interface and the available features vary by application. Figure 2 Graphical User Interface Reading MIB Files This section describes how to interpret the basic components of a MIB file. To determine the OIDs, view the file snmp.h. For more information, see SNMP File on page 29.
MIB files describe a specific component of a network device. The files are numerical strings that are converted to ASCII text by the compiler of the SNMP manager. A word processor or text editor can be used to open the ASCII file. The contents of an example Dell enterprise MIB file are as follows: Opening Line Following is the opening line, the beginning of the MIB file. AI-AP-MIB DEFINITIONS ::= BEGIN Imports The Imports section lists the objects that are defined in external ASN.
Identity Identity is the opening description of the MIB. The information includes contact information for the vendor and a general description of the MIB. aiMIB MODULE-IDENTITY LAST-UPDATED "0804160206Z" ORGANIZATION "Aruba Wireless Networks" CONTACT-INFO "Postal: 1322 Crossman Avenue Sunnyvale, CA 94089 E-mail: dl-support@arubanetworks.com Phone: +1 408 227 4500" DESCRIPTION "This MIB is for managing Dell Networking W-Series Instant WLAN" REVISION "0804160206Z" DESCRIPTION "The initial revision.
DESCRIPTION " " INDEX { aiAPMACAddress } ::= { aiAccessPointTable 1 } AiAccessPointEntry ::= SEQUENCE { aiAPMACAddress MacAddress, aiAPName DisplayString, aiAPIPAddress IpAddress, aiAPSerialNum DisplayString, aiAPModel OBJECT IDENTIFIER, aiAPModelName DisplayString, aiAPCPUUtilization Integer32, aiAPMemoryFree Integer32, aiAPUptime TimeTicks Closing Line Following is the closing line—the end of the MIBs file. END SNMP File The snmp.h file lists the OIDs of all MIBs. Following are sections from snmp.
Chapter 4 Instant MIBs This chapter provides information about the Instant MIB objects. Figure 3 shows the architecture of the Instant MIB relative to 1.3.6.1.4.1.14823 (iso.org.dod.internet.private.enterprise.aruba). The Instant MIB is listed in the file aruba-instant.my. For information about downloading the MIB file, see Downloading MIB Files on page 25. Figure 3 MIB Hierarchy Dell Networking W-Series Instant 6.4.0.2-4.
The Instant MIB tree consists of the following MIB groups and tables. Table 6: Supported Instant MIBs and MIB Tables Group Description aiInfoGroup Contains details of the virtual controller. For more information, see aiInfoGroup on page 31. aiStateGroup Contains information about status of the Access Point, Radio, WLAN, and Clients connected to a W-IAP. The following tables are available in the aiInfoGroup: l aiAccessPointTable—Contains all the access points connected to the virtual controller.
aiVirtualControllerName Object ID 1.3.6.1.4.1.14823.2.3.3.1.1.2 Syntax DisplayString Max-Access Read-only Status Current Description Name of the Virtual Controller aiVirtualControllerOrganization Object ID 1.3.6.1.4.1.14823.2.3.3.1.1.3 Syntax DisplayString Max-Access Read-only Status Current Description Virtual Controller organization aiVirtualControllerVersion Object ID 1.3.6.1.4.1.14823.2.3.3.1.1.
aiMasterIPAddress Object ID 1.3.6.1.4.1.14823.2.3.3.1.1.6 Syntax IPAddress Max-Access Read-only Status Current Description IP address of the master W-IAP. aiStateGroup The aiStateGroup contains the following tables: l aiAccessPointTable l aiRadioTable l aiWlanTable l aiClientTable aiAccessPointTable The objects of the aiAccessPointTable provide information about all the W-IAPs connected to the virtual controller.
aiAccessPointEntry Syntax aiAccessPointEntry Max-Access not-accessible Status current Description NA Index aiAPMACAddress aiAPMACAddress Syntax MacAddress (OCTET STRING). Hint: 1x: Max-Access read-only Status current Description MAC address of the Access Point. aiAPName Syntax DisplayString (SIZE(0..64)) Max-Access read-only Status current Description Name of the Access Point.
aiAPModel Syntax OBJECT IDENTIFIER Max-Access read-only Status current Description AP model aiAPModelName Syntax DisplayString (SIZE(0..32)) Max-Access read-only Status current Description Model name of the Access Point. aiAPCPUUtilization Syntax Integer32 Max-Access read-only Status current Description CPU utilization of the Access Point. aiAPMemoryFree Syntax Integer32 Max-Access read-only Status current Description Amount of memory free in the access point in bytes.
aiAPTotalMemory Syntax Integer32 Max-Access read-only Status current Description Total amount of memory available in the AP in bytes. aiAPStatus Syntax Integer {up(1), down(2)} Max-Access read-only Status current Description Indicates the Access Point Status. aiRadioTable The objects of the aiRadioTable provide information about all the radios and the related information of the Access Points. Table 8: aiRadioTable OIDs Object Object ID Entry OID aiRadioEntry 1.3.6.1.4.1.14823.2.3.3.1.2.
Object Object ID Entry OID aiRadioTxTotalFrames 1.3.6.1.4.1.14823.2.3.3.1.2.2.1.14 aiRadioEntry 14 aiRadioRxDataFrames 1.3.6.1.4.1.14823.2.3.3.1.2.2.1.15 aiRadioEntry 15 aiRadioRxDataBytes 1.3.6.1.4.1.14823.2.3.3.1.2.2.1.16 aiRadioEntry 16 aiRadioRxMgmtFrames 1.3.6.1.4.1.14823.2.3.3.1.2.2.1.17 aiRadioEntry 17 aiRadioRxBad 1.3.6.1.4.1.14823.2.3.3.1.2.2.1.18 aiRadioEntry 18 aiRadioPhyEvents 1.3.6.1.4.1.14823.2.3.3.1.2.2.1.19 aiRadioEntry 19 aiRadioStatus 1.3.6.1.4.1.14823.2.3.3.1.2.2.1.
aiRadioChannel Syntax Integer32 Max-Access read-only Status current Description Radio channel. The first byte contains primary channel and first two bits of second byte contains indicator for the secondary channel. If first two bits of second byte are 0, it is a 20MHz channel. If first two bits of second byte are 01, the secondary channel is above primary channel, if first two bits of second byte are 10, the secondary channel is below the primary channel.
aiRadioTxTotalFrames Syntax Counter32 Max-Access read-only Status current Description Total number of frames transmitted. aiRadioTxMgmtFrames Syntax Counter32 Max-Access read-only Status current Description Total number of management frames transmitted. aiRadioTxDataFrames Syntax Counter32 Max-Access read-only Status current Description Total number of data frames transmitted.
aiRadioRxTotalFrames Syntax Counter32 Max-Access read-only Status current Description Total number of received frames. aiRadioRxDataFrames Syntax Counter32 Max-Access read-only Status current Description Total number of received data frames. aiRadioRxDataBytes Syntax Counter32 Max-Access read-only Status current Description Total number of received data bytes.
aiRadioPhyEvents Syntax Counter32 Max-Access read-only Status current Description Number of physical layer events that indicates frames not received because of interference. aiRadioStatus Syntax Integer {up(1), down(2)} Max-Access read-only Status current Description Indicates the radio status of the AP. aiWlanTable The objects of the aiWlanTable provide information about all the BSSIDs active on the virtual controller. Table 9: aiWlanTable OIDs Object Object ID Entry OID aiWlanEntry 1.
aiWlanEntry Syntax AiWlanEntry Max-Access not-accessible Status current Description NA Index aiWlanAPMACAddress, aiWlanIndex aiWlanAPMACAddress Syntax MacAddress (OCTET STRING). Hint: 1x: Max-Access read-only Status current Description MAC Address of the Access Point where WLAN is active. aiWlanIndex Syntax Integer32 Max-Access read-only Status current Description Index of the WLAN. This is a unique index assigned to the active WLAN on the Access Point.
aiWlanTxTotalFrames Syntax Counter32 Max-Access read-only Status current Description Total number of frames transmitted. aiWlanTxDataFrames Syntax Counter32 Max-Access read-only Status current Description Total number of data frames transmitted. aiWlanTxDataBytes Syntax Counter32 Max-Access read-only Status current Description Total number of data bytes transmitted.
aiWlanRxDataBytes Syntax Counter32 Max-Access read-only Status current Description Total number of received data bytes. aiClientTable The objects of the aiWlanTable provide information about all the clients connected to the virtual controller. Table 10: aiClientTable OID Object Object ID Entry OID aiClientEntry 1.3.6.1.4.1.14823.2.3.3.1.2.4.1 aiClientTable 1 aiClientMACAddress 1.3.6.1.4.1.14823.2.3.3.1.2.4.1.1 aiClientEntry 1 aiClientWlanMACAddress 1.3.6.1.4.1.14823.2.3.3.1.2.4.1.
aiClientEntry Syntax aiClientEntry Max-Access not-accessible Status current Description NA Index aiClientMACAddress aiClientMACAddress Syntax MacAddress (OCTET STRING). Hint: 1x: Max-Access read-only Status current Description MAC Address of the client. aiClientWlanMACAddress Syntax MacAddress Max-Access read-only Status current Description BSSID of WLAN where client is associated.
aiClientName Syntax Max-Access read-only Status current Description Name of the user using the client. aiClientOperatingSystem Syntax Max-Access read-only Status current Description Operating system of the client. aiClientSNR Syntax Max-Access read-only Status current Description Signal to noise ratio of the client connected to the Access Point aiClientTxDataFrames Syntax Max-Access read-only Status current Description Total number of frames transmitted by the client.
aiClientTxRetries Syntax Max-Access read-only Status current Description Total number of retry frames transmitted by the client. aiClientTxRate Syntax Integer32 Max-Access read-only Status current Description Transmission rate of the client in mbps. aiClientRxDataFrames Syntax Max-Access read-only Status current Description Total number of frames received by the client in mbps.
aiClientRxRate Syntax Max-Access read-only Status current Description Receiving rate of the client in mbps. aiClientUptime Syntax TimeTicks Max-Access read-only Status current Description Client uptime. On mobility event all counters are reset to 0 and uptime resets to 0. Dell Networking W-Series Instant 6.4.0.2-4.
Chapter 5 Standard SNMP MIBs This chapter provides information on the following standard MIBs modules and tables supported in this release of Instant. l System MIB l dot1qTpFdbTable l ifTable l ifXTable System MIB The system MIB contains system-specific information about the W-IAP. The following system MIB objects are supported: l sysDescr— Provides information on the W-IAP model and software version of the W-IAP. l sysObjectID —Identifies the network management subsystem.
sysDescr Object ID 1.3.6.1.2.1.1.1 Syntax DisplayString Max-Access read-only Status mandatory Description A textual description of the entity. This value should include the full name and version identification of the system's hardware type, software operatingsystem, and networking software. It is mandatory that this only contains printable ASCII characters. sysObjectID Object ID 1.3.6.1.2.1.1.
sysLocation Object ID 1.3.6.1.2.1.1.6 Syntax DisplayString Max-Access read-write Status mandatory Description System location of the W-IAP cluster sysServices Object ID 1.3.6.1.2.1.1.7 Syntax Integer Max-Access read-only Status mandatory Description A value which indicates the set of services that the AP primarily offers. dot1qTpFdbTable This table contains information about the associated station MAC addresses, the corresponding port from the interface table, and status.
dot1qTpFdbAddress Object ID 1.3.6.1.2.1.17.7.1.2.2.1.1 Syntax MacAddress Max-Access not-accessible Status current Description MAC address for which the AP has forwarding or filtering information. dot1qTpFdbPort Object ID 1.3.6.1.2.1.17.7.1.2.2.1.2 Syntax Integer32 (0..65535) Max-Access read-only Status current Description Port number on which a frame having a source address equal to the value of the corresponding instance of dot1qTpFdbAddress.
l ifAdminStatus l ifOperStatus l ifInOctets l ifInUcastPkts l ifInNUcastPkts l ifInDiscards l ifInErrors l ifOutOctets l ifOutUcastPkts l ifInDiscards l ifInErrors The following ifTable objects are not supported: l ifOutQLen l ifSpecific l ifInUnknownProtos l ifLastChange ifIndex Object ID 1.3.6.1.2.1.2.2.1.1 Syntax Integer32 Max-Access read-only Status current Description Value assigned to an interface.
ifType Object ID 1.3.6.1.2.1.2.2.1.3 Syntax IANAifType Max-Access read-only Status current Description Type of the interface. For example, Gigabit Ethernet interface or Fast Ethernet. Object ID 1.3.6.1.2.1.2.2.1.4 Syntax Integer32 Max-Access read-only Status current Description The size of the largest packet which can be sent or received on interface. Object ID 1.3.6.1.2.1.2.2.1.
ifAdminStatus Object ID 1.3.6.1.2.1.2.2.1.7 Syntax INTEGER Max-Access read-write Status current Description Administrative state of the interface. ifOperStatus Object ID 1.3.6.1.2.1.2.2.1.8 Syntax INTEGER Max-Access read-only Status current Description Operational status of the interface. ifInOctets Object ID 1.3.6.1.2.1.2.2.1.10 Syntax Counter32 Max-Access read-only Status current Description Number of octets received on the interface. ifInUcastPkts Object ID 1.3.6.1.2.1.2.2.
ifInNUcastPkts Object ID 1.3.6.1.2.1.2.2.1.12 Syntax Counter32 Max-Access read-only Status current Description The number of packets, delivered by this sub-layer to a higher sub-layer, which were addressed to a multicast or broadcast address at this sub-layer. ifInDiscards Object ID 1.3.6.1.2.1.2.2.1.13 Syntax Counter32 Max-Access read-only Status current Description The number of inbound packets discarded. ifInErrors Object ID 1.3.6.1.2.1.2.2.1.
ifOutUcastPkts Object ID 1.3.6.1.2.1.2.2.1.17 Syntax Counter32 Max-Access read-only Status current Description The total number of packets that the higher-level protocols request for transmission, and the packets which are not addressed to a multicast or broadcast address at this sub-layer, including those that are discarded or not sent. ifOutDiscards Object ID 1.3.6.1.2.1.2.2.1.
l ifHCOutOctets l ifHCOutUcastPkts l ifHCOutMulticastPkts l ifHCOutBroadcastPkts l ifLinkUpDownTrapEnable l ifPromiscuousMode l ifConnectorPresent The following ifXTable objects are not supported: l ifHighSpeed l ifAlias l ifCounterDiscontinuityTime ifName Object ID 1.3.6.1.2.1.31.1.1.1.1 Syntax DisplayString Max-Access read-only Status current Description Name of the interface ifInMulticastPkts Object ID 1.3.6.1.2.1.31.1.1.1.
ifOutMulticastPkts Object ID 1.3.6.1.2.1.31.1.1.1.4 Syntax Counter32 Max-Access read-only Status current Description The total number of packets that the higher-level protocols request for transmission, and which were addressed to a multicast or broadcast address at this sub-layer. ifOutBroadcastPkts Object ID 1.3.6.1.2.1.31.1.1.1.
ifHCInMulticastPkts Object ID 1.3.6.1.2.1.31.1.1.1.8 Syntax Counter64 Max-Access read-only Status current Description The number of packets, delivered by this sub-layer to a higher sub-layer, which were addressed to a multicast or broadcast address at this sublayer. ifHCInBroadcastPkts Object ID 1.3.6.1.2.1.31.1.1.1.
ifHCOutUcastPkts Object ID 1.3.6.1.2.1.31.1.1.1.11 Syntax Counter64 Max-Access read-only Status current Description The total number of packets that higher-level protocols requested be transmitted, and which were not addressed to a multicast or broadcast address at this sub-layer, including those that were discarded or not sent. ifHCOutMulticastPkts Object ID 1.3.6.1.2.1.31.1.1.1.
ifLinkUpDownTrapEnable Object ID 1.3.6.1.2.1.31.1.1.1.14 Syntax Integer Max-Access read-write Status current Description Indicates whether linkUp or linkDown traps must be generated for this interface. ifPromiscuousMode Object ID 1.3.6.1.2.1.31.1.1.1.16 Syntax Integer Max-Access TruthValue Status current Description This object has true (1) and false(2) values. ifConnectorPresent Object ID 1.3.6.1.2.1.31.1.1.1.
Chapter 6 Traps This chapter defines the traps that can be generated by the W-IAP. Traps are MIB objects (variables) that transmit information to the SNMP Manager when an event occurs. Traps are included as varbinds (variable bindings) in the trap protocol data unit (PDU). The traps for the W-IAP cluster are generated with the master W-IAP IP address as the source IP address. If the Virtual Controller IP is configured, the traps are generated from the Virtual Controller IP.
The following table lists the supported trap objects in this group: Table 11: aiTraps Objects Group OIDs 64 | Traps Object Object ID wlsxTrapAPMacAddress 1.3.6.1.4.1.14823.2.3.3.1.200.1.1 wlsxTrapObjectsGroup 1 wlsxTrapAPIpAddress 1.3.6.1.4.1.14823.2.3.3.1.200.1.2 wlsxTrapObjectsGroup 2 wlsxTrapAPBSSID 1.3.6.1.4.1.14823.2.3.3.1.200.1.3 wlsxTrapObjectsGroup 3 wlsxTrapEssid 1.3.6.1.4.1.14823.2.3.3.1.200.1.4 wlsxTrapObjectsGroup 4 wlsxTrapTargetAPBSSID 1.3.6.1.4.1.14823.2.3.3.1.200.1.
Table 11: aiTraps Objects Group OIDs Object Object ID wlsxTrapCardSlot 1.3.6.1.4.1.14823.2.3.3.1.200.1.28 wlsxTrapObjectsGroup 28 wlsxTrapTemperatureValue 1.3.6.1.4.1.14823.2.3.3.1.200.1.29 wlsxTrapObjectsGroup 29 wlsxTrapProcessName 1.3.6.1.4.1.14823.2.3.3.1.200.1.30 wlsxTrapObjectsGroup 30 wlsxTrapFanNumber 1.3.6.1.4.1.14823.2.3.3.1.200.1.31 wlsxTrapObjectsGroup 31 wlsxTrapVoltageType 1.3.6.1.4.1.14823.2.3.3.1.200.1.32 wlsxTrapObjectsGroup 32 wlsxTrapVoltageValue 1.3.6.1.4.1.14823.2.3.3.
Table 11: aiTraps Objects Group OIDs 66 | Traps Object Object ID wlsxTrapUserAuthenticationMethod 1.3.6.1.4.1.14823.2.3.3.1.200.1.55 wlsxTrapObjectsGroup 55 wlsxTrapAPRadioNumber 1.3.6.1.4.1.14823.2.3.3.1.200.1.56 wlsxTrapObjectsGroup 56 wlsxTrapRogueInfoURL 1.3.6.1.4.1.14823.2.3.3.1.200.1.57 wlsxTrapObjectsGroup 57 wlsxTrapInterferingAPInfoURL 1.3.6.1.4.1.14823.2.3.3.1.200.1.58 wlsxTrapObjectsGroup 58 wlsxTrapPortNumber 1.3.6.1.4.1.14823.2.3.3.1.200.1.
Table 11: aiTraps Objects Group OIDs Object Object ID wlsxTrapMasterIp 1.3.6.1.4.1.14823.2.3.3.1.200.1.82 wlsxTrapObjectsGroup 82 wlsxTrapLocaIIp 1.3.6.1.4.1.14823.2.3.3.1.200.1.83 wlsxTrapObjectsGroup 83 wlsxTrapMasterName 1.3.6.1.4.1.14823.2.3.3.1.200.1.84 wlsxTrapObjectsGroup 84 wlsxTrapLocalName 1.3.6.1.4.1.14823.2.3.3.1.200.1.85 wlsxTrapObjectsGroup 85 wlsxTrapPrimaryControllerIp 1.3.6.1.4.1.14823.2.3.3.1.200.1.86 wlsxTrapObjectsGroup 86 wlsxTrapBackupControllerIp 1.3.6.1.4.1.14823.2.
Table 11: aiTraps Objects Group OIDs Object Object ID wlsxTrapAPPreviousUplinkType 1.3.6.1.4.1.14823.2.3.3.1.200.1.130 wlsxTrapObjectsGroup 130 wlsxTrapAPPreviousUplinkActiveTime 1.3.6.1.4.1.14823.2.3.3.1.200.1.131 wlsxTrapObjectsGroup 131 wlsxTrapAPActiveUplinkType 1.3.6.1.4.1.14823.2.3.3.1.200.1.132 wlsxTrapObjectsGroup 132 wlsxTrapAPUplinkChangeReason 1.3.6.1.4.1.14823.2.3.3.1.200.1.133 wlsxTrapObjectsGroup 133 wlsxTrapAPManagedModeConfigFailure 1.3.6.1.4.1.14823.2.3.3.1.200.1.
wlsxTrapEssid Syntax DisplayString(Size(0..64)) Max-Access accessible-for-notify Status current Description This object is used in the traps to indicate the SSID of the access point, for which the trap is being raised. wlsxTrapTargetAPBSSID Syntax MacAddress Max-Access accessible-for-notify Status current Description This object is used in the traps to indicate the BSSID of the access point, for which we are raising the trap. If an Air Monitor is sending the trap then this will indicate AP.
wlsxTrapNodeMac Syntax MacAddress Max-Access accessible-for-notify Status current Description This object is used in the traps to indicate the MAC address of a node. wlsxTrapSourceMac Syntax MacAddress Max-Access accessible-for-notify Status current Description This object is used in the traps to indicate the MAC address of the source.
wlsxTrapSnr Syntax Integer32 Max-Access accessible-for-notify Status current Description This object is used in the traps to indicate the signal-to-noise ratio. wlsxTrapSignatureName Syntax DisplayString(Size(0..64)) Max-Access accessible-for-notify Status current Description This object is used in the traps to indicate the signature name.
wlsxTrapAPChannel Syntax Integer32 Max-Access accessible-for-notify Status current Description This object is used in the traps to indicate the current channel. wlsxTrapAPTxPower Syntax Integer32 Max-Access accessible-for-notify Status current Description This object is used in the traps to indicate the AP transmit power. wlsxTrapMatchedMac Syntax MacAddress Max-Access accessible-for-notify Status current Description This object is used in the traps to indicate the MAC address.
wlsxTrapVLANId Syntax Integer32 Max-Access accessible-for-notify Status current Description This object is used in the traps to indicate the VLAN ID. wlsxTrapAdminStatus Syntax ArubaEnableValue (INTEGER) Max-Access accessible-for-notify Status current Description This object is used in the traps to indicate the admin status of VLAN.
wlsxTrapCardSlot Syntax Integer32 Max-Access accessible-for-notify Status current Description This object is used in the traps to indicate the slot in which this card is present. wlsxTrapTemperatureValue Syntax DisplayString(Size(0..64)) Max-Access accessible-for-notify Status current Description This object is used in the traps to indicate the temperature value. wlsxTrapProcessName Syntax DisplayString(Size(0..
wlsxTrapVoltageValue Syntax DisplayString(Size(0..64)) Max-Access accessible-for-notify Status current Description This object is used in the traps to indicate the voltage value in float. wlsxTrapStationBlackListReason Syntax ArubaBlackListReason Max-Access accessible-for-notify Status current Description The reason for which a station is black listed.
wlsxTrapDBName Syntax DisplayString(Size(0..64)) Max-Access accessible-for-notify Status current Description This object is used in a trap to identify the name of the database. wlsxTrapDBUserName Syntax DisplayString(Size(0..64)) Max-Access accessible-for-notify Status current Description This object is used in a trap to identify the name of the database user. wlsxTrapDBIpAddress Syntax DisplayString(Size(0..
wlsxTrapVrrpMasterIp Syntax IpAddress Max-Access accessible-for-notify Status current Description This object contains the master IP address. wlsxTrapVrrpOperState Syntax ArubaVrrpState Max-Access accessible-for-notify Status current Description This object represents the VRRP operational state. wlsxTrapESIServerGrpName Syntax DisplayString(Size(0..
wlsxTrapLicenseDaysRemaining Syntax Integer32 Max-Access accessible-for-notify Status current Description This object represents the number of days remaining prior to a license expiry. wlsxTrapSwitchIp Syntax IpAddress Max-Access accessible-for-notify Status current Description This object represents the controller IP address. wlsxTrapSwitchRole Syntax ArubaSwitchRole Max-Access accessible-for-notify Status current Description This object represents the role of the controller.
wlsxTrapUserName Syntax DisplayString(Size(0..64)) Max-Access accessible-for-notify Status current Description This object represents the user name. wlsxTrapUserRole Syntax DisplayString(Size(0..64)) Max-Access accessible-for-notify Status current Description This object represents the Authentication method of the user.
wlsxTrapInterferingAPInfoURL Syntax DisplayString(Size(0..64)) Max-Access accessible-for-notify Status current Description This object is used to point to the WEBGUI Rogue interfering access point information URL. wlsxTrapPortNumber Syntax Integer32 Max-Access accessible-for-notify Status current Description This object is used in the traps to indicate the port number.
wlsxTrapConfigurationId Syntax Integer32 Max-Access accessible-for-notify Status current Description wlsxTrapCTSURL Syntax DisplayString(Size(0..64)) Max-Access accessible-for-notify Status current Description This object represents the URL from which the transfer should happen. wlsxTrapCTSTransferType Syntax DisplayString(Size(0..64)) Max-Access accessible-for-notify Status current Description This object represents the transfer type, upload or download.
wlsxTrapUpdateFailedObj Syntax DisplayString(Size(0..64)) Max-Access accessible-for-notify Status current Description This variable represents the AMAPI object which is the reason for the update failure. wlsxTrapTableEntryChangeType Syntax ArubaConfigurationChangeType (INTEGER) Max-Access accessible-for-notify Status current Description This object represents the type of the configuration change. wlsxTrapGlobalConfigObj Syntax DisplayString(Size(0..
wlsxTrapConfidenceLevel Syntax Integer32 Max-Access accessible-for-notify Status current Description This object is used in the traps to indicate the confidence level as a percentage. wlsxTrapMissingLicenses Syntax DisplayString(Size(0..64)) Max-Access accessible-for-notify Status current Description This variable indicates any licenses that are not present during a configuration update.
wlsxTrapTunnelUpReason Syntax DisplayString(Size(0..64)) Max-Access accessible-for-notify Status current Description This object represents the tunnel up reason. wlsxTrapTunnelDownReason Syntax DisplayString(Size(0..64)) Max-Access accessible-for-notify Status current Description This object represents the tunnel down reason. wlsxTrapApSerialNumber Syntax DisplayString(Size(0..64)) Max-Access accessible-for-notify Status current Description This object represents the AP serial number.
wlsxTrapLocaIIp Syntax IpAddress Max-Access accessible-for-notify Status current Description This object represents the local IP address. wlsxTrapMasterName Syntax DisplayString(Size(0..64)) Max-Access accessible-for-notify Status current Description This object represents the master controller name. wlsxTrapLocalName Syntax DisplayString(Size(0..64)) Max-Access accessible-for-notify Status current Description This object represents the local controller name.
wlsxTrapSpoofedFrameType Syntax DisplayString (SIZE(0..64)) Max-Access accessible-for-notify Status current Description This object is used in the traps to indicate the Spoofed Frame Type wlsxTrapAssociationType Syntax DisplayString (SIZE(0..64)) Max-Access accessible-for-notify Status current Description This object is used in the traps to indicate the type of association.
wlsxTrapVcMacAddress Syntax MacAddress Max-Access accessible-for-notify Status current Description This object represents the MAC address of a Voice client. wlsxTrapAPName Syntax DisplayString (SIZE(0..64)) Max-Access accessible-for-notify Status current Description This object is used in the traps to indicate the Name of the AP.
wlsxTrapAPPrevTxPower Syntax Integer32 Max-Access accessible-for-notify Status current Description This object is used in the traps to indicate previous AP Transmit Power. wlsxTrapAPCurMode Syntax ArubaAccessPointMode (INTEGER) Max-Access accessible-for-notify Status current Description This Object represents the APs Current Mode.
wlsxTrapUserAttributeChangeType Syntax ArubaConfigurationChangeType (INTEGER) Max-Access accessible-for-notify Status current Description This object represents type of the configuration change. wlsxTrapAPControllerIp Syntax IpAddress Max-Access accessible-for-notify Status current Description wlsxTrapApMasterStatus Syntax ArubaAPMasterStatus (INTEGER) Max-Access accessible-for-notify Status current Description Status of the AP as seen by the master when the status changes.
wlsxTrapCount Syntax Integer32 Max-Access accessible-for-notify Status current Description This object represents the number of occurrence of this trap. wlsxTrapAPPreviousUplinkType Syntax ArubaAPUplinkType Max-Access accessible-for-notify Status current Description This object represents the previous uplink type of an AP.
wlsxTrapAPManagedModeConfigFailure Syntax DisplayString (SIZE(0..64) Max-Access accessible-for-notify Status current Description This object indicates that the configuration application has failed on the AP. ai Traps Objects Group The following table lists the supported trap objects in this group: Table 12: aiTraps Objects Group OIDs Object Object ID wlsxTrapAPMacAddress 1.3.6.1.4.1.14823.2.3.3.1.200.1.1 wlsxTrapObjectsGroup 1 wlsxTrapAPIpAddress 1.3.6.1.4.1.14823.2.3.3.1.200.1.
| Traps Object Object ID wlsxTrapMatchedIp 1.3.6.1.4.1.14823.2.3.3.1.200.1.21 wlsxTrapObjectsGroup 21 wlsxTrapRogueIfoURL 1.3.6.1.4.1.14823.2.3.3.1.200.1.22 wlsxTrapObjectsGroup 22 wlsxTrapVLANId 1.3.6.1.4.1.14823.2.3.3.1.200.1.23 wlsxTrapObjectsGroup 23 wlsxTrapAdminStatus 1.3.6.1.4.1.14823.2.3.3.1.200.1.24 wlsxTrapObjectsGroup 24 wlsxTrapOperStatus 1.3.6.1.4.1.14823.2.3.3.1.200.1.25 wlsxTrapObjectsGroup 25 wlsxTrapAuthServerName 1.3.6.1.4.1.14823.2.3.3.1.200.1.
Object Object ID wlsxTrapSwitchIp 1.3.6.1.4.1.14823.2.3.3.1.200.1.49 wlsxTrapObjectsGroup 49 wlsxTrapSwitchRole 1.3.6.1.4.1.14823.2.3.3.1.200.1.50 wlsxTrapObjectsGroup 50 wlsxTrapUserIpAddress 1.3.6.1.4.1.14823.2.3.3.1.200.1.51 wlsxTrapObjectsGroup 51 wlsxTrapUserPhyAddress 1.3.6.1.4.1.14823.2.3.3.1.200.1.52 wlsxTrapObjectsGroup 52 wlsxTrapUserName 1.3.6.1.4.1.14823.2.3.3.1.200.1.53 wlsxTrapObjectsGroup 53 wlsxTrapUserRole 1.3.6.1.4.1.14823.2.3.3.1.200.1.
| Traps Object Object ID wlsxTrapTunnelStatus 1.3.6.1.4.1.14823.2.3.3.1.200.1.77 wlsxTrapObjectsGroup 77 wlsxTrapTunnelUpReason 1.3.6.1.4.1.14823.2.3.3.1.200.1.78 wlsxTrapObjectsGroup 78 wlsxTrapTunnelDownReason 1.3.6.1.4.1.14823.2.3.3.1.200.1.79 wlsxTrapObjectsGroup 79 wlsxTrapApSerialNumber 1.3.6.1.4.1.14823.2.3.3.1.200.1.80 wlsxTrapObjectsGroup 80 wlsxTraptimeStr 1.3.6.1.4.1.14823.2.3.3.1.200.1.81 wlsxTrapObjectsGroup 81 wlsxTrapMasterIp 1.3.6.1.4.1.14823.2.3.3.1.200.1.
Object Object ID wlsxTrapApMasterStatus 1.3.6.1.4.1.14823.2.3.3.1.200.1.105 wlsxTrapObjectsGroup 105 wlsxTrapCaName 1.3.6.1.4.1.14823.2.3.3.1.200.1.106 wlsxTrapObjectsGroup 106 wlsxTrapCrlName 1.3.6.1.4.1.14823.2.3.3.1.200.1.107 wlsxTrapObjectsGroup 107 wlsxTrapCount 1.3.6.1.4.1.14823.2.3.3.1.200.1.108 wlsxTrapObjectsGroup 108 wlsxTrapAPPreviousUplinkType 1.3.6.1.4.1.14823.2.3.3.1.200.1.130 wlsxTrapObjectsGroup 130 wlsxTrapAPPreviousUplinkActiveTime 1.3.6.1.4.1.14823.2.3.3.1.200.1.
wlsxTrapEssid Syntax DisplayString(Size(0..64)) Max-Access accessible-for-notify Status current Description This object is used in the traps to indicate the SSID of the access point, for which the trap is being raised. wlsxTrapTargetAPBSSID Syntax MacAddress Max-Access accessible-for-notify Status current Description This object is used in the traps to indicate the BSSID of the access point, for which we are raising the trap. If an Air Monitor is sending the trap then this will indicate AP.
wlsxTrapNodeMac Syntax MacAddress Max-Access accessible-for-notify Status current Description This object is used in the traps to indicate the MAC address of a node. wlsxTrapSourceMac Syntax MacAddress Max-Access accessible-for-notify Status current Description This object is used in the traps to indicate the MAC address of the source.
wlsxTrapSnr Syntax Integer32 Max-Access accessible-for-notify Status current Description This object is used in the traps to indicate the signal-to-noise ratio. wlsxTrapSignatureName Syntax DisplayString(Size(0..64)) Max-Access accessible-for-notify Status current Description This object is used in the traps to indicate the signature name.
wlsxTrapAPChannel Syntax Integer32 Max-Access accessible-for-notify Status current Description This object is used in the traps to indicate the current channel. wlsxTrapAPTxPower Syntax Integer32 Max-Access accessible-for-notify Status current Description This object is used in the traps to indicate the AP transmit power. wlsxTrapMatchedMac Syntax MacAddress Max-Access accessible-for-notify Status current Description This object is used in the traps to indicate the MAC address.
wlsxTrapVLANId Syntax Integer32 Max-Access accessible-for-notify Status current Description This object is used in the traps to indicate the VLAN ID. wlsxTrapAdminStatus Syntax ArubaEnableValue (INTEGER) Max-Access accessible-for-notify Status current Description This object is used in the traps to indicate the admin status of VLAN.
wlsxTrapCardSlot Syntax Integer32 Max-Access accessible-for-notify Status current Description This object is used in the traps to indicate the slot in which this card is present. wlsxTrapTemperatureValue Syntax DisplayString(Size(0..64)) Max-Access accessible-for-notify Status current Description This object is used in the traps to indicate the temperature value. wlsxTrapProcessName Syntax DisplayString(Size(0..
wlsxTrapVoltageValue Syntax DisplayString(Size(0..64)) Max-Access accessible-for-notify Status current Description This object is used in the traps to indicate the voltage value in float. wlsxTrapStationBlackListReason Syntax ArubaBlackListReason Max-Access accessible-for-notify Status current Description The reason for which a station is black listed.
wlsxTrapDBName Syntax DisplayString(Size(0..64)) Max-Access accessible-for-notify Status current Description This object is used in a trap to identify the name of the database. wlsxTrapDBUserName Syntax DisplayString(Size(0..64)) Max-Access accessible-for-notify Status current Description This object is used in a trap to identify the name of the database user. wlsxTrapDBIpAddress Syntax DisplayString(Size(0..
wlsxTrapVrrpMasterIp Syntax IpAddress Max-Access accessible-for-notify Status current Description This object contains the master IP address. wlsxTrapVrrpOperState Syntax ArubaVrrpState Max-Access accessible-for-notify Status current Description This object represents the VRRP operational state. wlsxTrapESIServerGrpName Syntax DisplayString(Size(0..
wlsxTrapLicenseDaysRemaining Syntax Integer32 Max-Access accessible-for-notify Status current Description This object represents the number of days remaining prior to a license expiry. wlsxTrapSwitchIp Syntax IpAddress Max-Access accessible-for-notify Status current Description This object represents the controller IP address. wlsxTrapSwitchRole Syntax ArubaSwitchRole Max-Access accessible-for-notify Status current Description This object represents the role of the controller.
wlsxTrapUserName Syntax DisplayString(Size(0..64)) Max-Access accessible-for-notify Status current Description This object represents the user name. wlsxTrapUserRole Syntax DisplayString(Size(0..64)) Max-Access accessible-for-notify Status current Description This object represents the Authentication method of the user.
wlsxTrapInterferingAPInfoURL Syntax DisplayString(Size(0..64)) Max-Access accessible-for-notify Status current Description This object is used to point to the WEBGUI Rogue interfering access point information URL. wlsxTrapPortNumber Syntax Integer32 Max-Access accessible-for-notify Status current Description This object is used in the traps to indicate the port number.
wlsxTrapConfigurationId Syntax Integer32 Max-Access accessible-for-notify Status current Description wlsxTrapCTSURL Syntax DisplayString(Size(0..64)) Max-Access accessible-for-notify Status current Description This object represents the URL from which the transfer should happen. wlsxTrapCTSTransferType Syntax DisplayString(Size(0..64)) Max-Access accessible-for-notify Status current Description This object represents the transfer type, upload or download.
wlsxTrapUpdateFailedObj Syntax DisplayString(Size(0..64)) Max-Access accessible-for-notify Status current Description This variable represents the AMAPI object which is the reason for the update failure. wlsxTrapTableEntryChangeType Syntax ArubaConfigurationChangeType (INTEGER) Max-Access accessible-for-notify Status current Description This object represents the type of the configuration change. wlsxTrapGlobalConfigObj Syntax DisplayString(Size(0..
wlsxTrapConfidenceLevel Syntax Integer32 Max-Access accessible-for-notify Status current Description This object is used in the traps to indicate the confidence level as a percentage. wlsxTrapMissingLicenses Syntax DisplayString(Size(0..64)) Max-Access accessible-for-notify Status current Description This variable indicates any licenses that are not present during a configuration update.
wlsxTrapTunnelUpReason Syntax DisplayString(Size(0..64)) Max-Access accessible-for-notify Status current Description This object represents the tunnel up reason. wlsxTrapTunnelDownReason Syntax DisplayString(Size(0..64)) Max-Access accessible-for-notify Status current Description This object represents the tunnel down reason. wlsxTrapApSerialNumber Syntax DisplayString(Size(0..64)) Max-Access accessible-for-notify Status current Description This object represents the AP serial number.
wlsxTrapLocaIIp Syntax IpAddress Max-Access accessible-for-notify Status current Description This object represents the local IP address. wlsxTrapMasterName Syntax DisplayString(Size(0..64)) Max-Access accessible-for-notify Status current Description This object represents the master controller name. wlsxTrapLocalName Syntax DisplayString(Size(0..64)) Max-Access accessible-for-notify Status current Description This object represents the local controller name.
wlsxTrapSpoofedFrameType Syntax DisplayString (SIZE(0..64)) Max-Access accessible-for-notify Status current Description This object is used in the traps to indicate the Spoofed Frame Type wlsxTrapAssociationType Syntax DisplayString (SIZE(0..64)) Max-Access accessible-for-notify Status current Description This object is used in the traps to indicate the type of association.
wlsxTrapVcMacAddress Syntax MacAddress Max-Access accessible-for-notify Status current Description This object represents the MAC address of a Voice client. wlsxTrapAPName Syntax DisplayString (SIZE(0..64)) Max-Access accessible-for-notify Status current Description This object is used in the traps to indicate the Name of the AP.
wlsxTrapAPPrevTxPower Syntax Integer32 Max-Access accessible-for-notify Status current Description This object is used in the traps to indicate previous AP Transmit Power. wlsxTrapAPCurMode Syntax ArubaAccessPointMode (INTEGER) Max-Access accessible-for-notify Status current Description This Object represents the APs Current Mode.
wlsxTrapUserAttributeChangeType Syntax ArubaConfigurationChangeType (INTEGER) Max-Access accessible-for-notify Status current Description This object represents type of the configuration change. wlsxTrapAPControllerIp Syntax IpAddress Max-Access accessible-for-notify Status current Description wlsxTrapApMasterStatus Syntax ArubaAPMasterStatus (INTEGER) Max-Access accessible-for-notify Status current Description Status of the AP as seen by the master when the status changes.
wlsxTrapCount Syntax Integer32 Max-Access accessible-for-notify Status current Description wlsxTrapAPPreviousUplinkType Syntax ArubaAPUplinkType Max-Access accessible-for-notify Status current Description wlsxTrapAPPreviousUplinkActiveTime Syntax TimeTicks Max-Access accessible-for-notify Status current Description wlsxTrapAPActiveUplinkType Syntax ArubaAPUplinkType Max-Access accessible-for-notify Status current Description wlsxTrapAPUplinkChangeReason Syntax ArubaAPUplinkChang
wlsxTrapAPManagedModeConfigFailure Syntax DisplayString (SIZE(0..64) Max-Access accessible-for-notify Status current Description This object indicates that the configuration application has failed on the AP. ai Traps Definitions Group Table 13: ai Traps Definitions Group OIDs 118 | Traps Object Object ID wlsxNUserEntryCreated 1.3.6.1.4.1.14823.2.3.3.1.200.2.1014 wlsxTrapDefinitionsGroup1014 wlsxNUserEntryDeleted 1.3.6.1.4.1.14823.2.3.3.1.200.2.
Object Object ID wlsxChannelMisconfiguration 1.3.6.1.4.1.14823.2.3.3.1.200.2.1058 wlsxTrapDefinitionsGroup1058 wlsxOUIMisconfiguration 1.3.6.1.4.1.14823.2.3.3.1.200.2.1059 wlsxTrapDefinitionsGroup1059 wlsxSSIDMisconfiguration 1.3.6.1.4.1.14823.2.3.3.1.200.2.1060 wlsxTrapDefinitionsGroup1060 wlsxShortPreable Misconfiguration 1.3.6.1.4.1.14823.2.3.3.1.200.2.1061 wlsxTrapDefinitionsGroup1061 wlsxWPAMisconfiguration 1.3.6.1.4.1.14823.2.3.3.1.200.2.
Object Object ID Exceeded 120 | Traps wlsxChannelFrame FragmentationRateExceeded 1.3.6.1.4.1.14823.2.3.3.1.200.2.1083 wlsxTrapDefinitionsGroup1083 wlsxChannelFrameErrorRate Exceeded 1.3.6.1.4.1.14823.2.3.3.1.200.2.1084 wlsxTrapDefinitionsGroup1084 wlsxSignatureMatchAP 1.3.6.1.4.1.14823.2.3.3.1.200.2.1085 wlsxTrapDefinitionsGroup1085 wlsxSignatureMatchSta 1.3.6.1.4.1.14823.2.3.3.1.200.2.1086 wlsxTrapDefinitionsGroup1086 wlsxChannelRateAnomaly 1.3.6.1.4.1.14823.2.3.3.1.200.2.
Object Object ID wlsxInterferingApDetected 1.3.6.1.4.1.14823.2.3.3.1.200.2.1106 wlsxTrapDefinitionsGroup1106 wlsxColdStart 1.3.6.1.4.1.14823.2.3.3.1.200.2.1111 wlsxTrapDefinitionsGroup1111 wlsxWarmStart 1.3.6.1.4.1.14823.2.3.3.1.200.2.1112 wlsxTrapDefinitionsGroup1112 wlsxAPImpersonation 1.3.6.1.4.1.14823.2.3.3.1.200.2.1113 wlsxTrapDefinitionsGroup1113 wlsxNAuthServerIsDown 1.3.6.1.4.1.14823.2.3.3.1.200.2.1115 wlsxTrapDefinitionsGroup1115 wlsxWindowsBridgeDetected 1.3.6.1.4.1.14823.2.3.3.
| Traps Object Object ID wlsxHT40MHzIntoleranceSta 1.3.6.1.4.1.14823.2.3.3.1.200.2.1159 wlsxTrapDefinitionsGroup1159 wlsxNAdhocNetwork 1.3.6.1.4.1.14823.2.3.3.1.200.2.1161 wlsxTrapDefinitionsGroup1161 wlsxNAdhocNetworkBridge DetectedAP 1.3.6.1.4.1.14823.2.3.3.1.200.2.1162 wlsxTrapDefinitionsGroup1162 wlsxNAdhocNetworkBridge DetectedSta 1.3.6.1.4.1.14823.2.3.3.1.200.2.1163 wlsxTrapDefinitionsGroup1163 wlsxClientFloodAttack 1.3.6.1.4.1.14823.2.3.3.1.200.2.
Object Object ID wlsxMalformedAuthFrame 1.3.6.1.4.1.14823.2.3.3.1.200.2.1189 wlsxTrapDefinitionsGroup1189 wlsxCTSRateAnomaly 1.3.6.1.4.1.14823.2.3.3.1.200.2.1190 wlsxTrapDefinitionsGroup1190 wlsxRTSRateAnomaly 1.3.6.1.4.1.14823.2.3.3.1.200.2.1191 wlsxTrapDefinitionsGroup1191 wlsxNRogueAPDetected 1.3.6.1.4.1.14823.2.3.3.1.200.2.1192 wlsxTrapDefinitionsGroup1192 wlsxNRogueAPResolved 1.3.6.1.4.1.14823.2.3.3.1.200.2.1193 wlsxTrapDefinitionsGroup1193 wlsxNeighborAPDetected 1.3.6.1.4.1.14823.2.
Object Object ID Containment wlsxTarpitContainment 1.3.6.1.4.1.14823.2.3.3.1.200.2.1214 wlsxTrapDefinitionsGroup1214 wlsxAPChannelChange 1.3.6.1.4.1.14823.2.3.3.1.200.2.1216 wlsxTrapDefinitionsGroup1216 wlsxAPPowerChange 1.3.6.1.4.1.14823.2.3.3.1.200.2.1217 wlsxTrapDefinitionsGroup1217 wlsxAPModeChange 1.3.6.1.4.1.14823.2.3.3.1.200.2.1218 wlsxTrapDefinitionsGroup1218 wlsxUserEntryAttributes Changed 1.3.6.1.4.1.14823.2.3.3.1.200.2.1219 wlsxTrapDefinitionsGroup1219 wlsxPowerSaveDosAttack 1.
wlsxNUserAuthenticationFailed Objects wlsxTrapTime, wlsxTrapUserIpAddress, wlsxTrapUserPhyAddress Status current Description This trap indicates that a user authentication has failed. wlsxNAuthServerReqTimedOut Objects wlsxTrapTime, wlsxTrapAuthServerName Status current Description This trap indicates that the authentication server request timed out.
wlsxNChannelChanged Objects wlsxTrapTime, wlsxTrapAPBSSID, wlsxTrapAPLocation, wlsxTrapAPChannel Status current Description This trap indicates that an access point at Location wlsxTrapAPLocation has changed the channel. wlsxNStationAddedToBlackList Objects wlsxTrapTime, wlsxTrapNodeMac, wlsxTrapStationBlackListReason Status current Description This trap indicates that the station is black listed.
wlsxUnsecureAPResolved Objects {wlsxTrapTime, wlsxTrapTargetAPBSSID, wlsxTrapTargetAPSSID, wlsxTrapAPMacAddress, wlsxTrapAPRadioNumber, wlsxTrapAPLocation, wlsxTrapAPChannel } Status current Description This trap indicates that a previously detected access point, classified as Rogue, is no longer present in the network.
wlsxOUIMisconfiguration Objects {wlsxTrapTime, wlsxTrapTargetAPBSSID, wlsxTrapTargetAPSSID, wlsxTrapAPMacAddress, wlsxTrapAPRadioNumber, wlsxTrapAPLocation, wlsxTrapAPChannel } Status current Description This trap indicates that an AP detected an access point that has an OUI misconfiguration because it is using an OUI that is not valid.
wlsxAdhocNetworkRemoved Objects { wlsxTrapTime, wlsxTrapTargetAPBSSID, wlsxTrapTargetAPSSID, wlsxTrapAPMacAddress, wlsxTrapAPRadioNumber, wlsxTrapAPLocation, wlsxTrapAPChannel } Status current Description This trap indicates that a previously detected adhoc network is no longer present in the network.
wlsxChannelInterferenceCleared Objects {wlsxTrapTime, wlsxTrapAPMacAddress, wlsxTrapAPRadioNumber, wlsxTrapAPLocation, wlsxTrapAPChannel} Status current Description This trap indicates that a previously detected channel interference is no longer present.
wlsxFrameRetryRateExceeded Objects { wlsxTrapTime, wlsxTrapTargetAPBSSID, wlsxTrapTargetAPSSID, wlsxTrapAPMacAddress, wlsxTrapAPRadioNumber, wlsxTrapAPLocation, wlsxTrapAPChannel } Status current Description This trap indicates that an AP detected that an access point has exceeded the configured upper threshold for Frame Retry Rate.
wlsxFrameNonUnicastRateExceeded Objects { wlsxTrapTime, wlsxTrapNodeMac, wlsxTrapTargetAPBSSID, wlsxTrapTargetAPSSID, wlsxTrapAPMacAddress, wlsxTrapAPRadioNumber, wlsxTrapAPLocation, wlsxTrapAPChannel} Status current Description This trap indicates that an AP detected that station has exceeded the configured upper threshold for Non Unicast traffic rate.
wlsxChannelFrameErrorRateExceeded Objects {wlsxTrapTime, wlsxTrapAPMacAddress, wlsxTrapAPRadioNumber, wlsxTrapAPLocation, wlsxTrapAPChannel} Status current Description This trap indicates that an AP has detected that the configured upper threshold for Frame Receive Error Rate was exceeded on a channel.
wlsxNodeRateAnomalyAP Objects {wlsxTrapTime, wlsxTrapFrameType, wlsxTrapTargetAPBSSID, wlsxTrapTargetAPSSID, wlsxTrapSnr, wlsxTrapAPMacAddress, wlsxTrapAPRadioNumber, wlsxTrapAPLocation} Status current Description This trap indicates that an AP detected frames transmitted or received by an access point, which exceed the configured IDS rate threshold. For more information check: http://www.wve.org/entries/show/WVE-2005-0052 http://www.wve.org/entries/show/WVE-2005-0045 http://www.wve.
wlsxSequenceNumberAnomalyAP Objects { wlsxTrapTime, wlsxTrapTargetAPBSSID, wlsxTrapTargetAPSSID, wlsxTrapSnr, wlsxTrapAPMacAddress, wlsxTrapAPRadioNumber, wlsxTrapAPLocation } Status current Description This trap indicates that an AM received packets from an AP which exceeds the acceptable sequence number difference. The acceptable sequence number difference is an IDS configuration object. For more information check: http://www.wve.org/entries/show/WVE-2005-0061 http://www.wve.
wlsxApFloodAttack Objects { wlsxTrapTime, wlsxTrapAPMacAddress, wlsxTrapAPRadioNumber, wlsxTrapAPLocation} Status current Description This trap indicates that the number of potential fake APs detected by an AP has exceeded the configured IDS threshold. This is the total number of fake APs observed across all bands. For more information check http://www.wve.
wlsxWEPMisconfiguration Objects {wlsxTrapTime, wlsxTrapTargetAPBSSID, wlsxTrapTargetAPSSID, wlsxTrapAPMacAddress, wlsxTrapAPRadioNumber, wlsxTrapAPLocation, wlsxTrapAPChannel} Status current Description This trap indicates that an AP detected an access point that is misconfigured because it does not have Privacy enabled.
wlsxAdhocNetworkBridgeDetected Objects {wlsxTrapTime, wlsxTrapSourceMac, wlsxTrapTargetAPBSSID, wlsxTrapTargetAPSSID, wlsxTrapAPMacAddress, wlsxTrapAPRadioNumber, wlsxTrapAPLocation, wlsxTrapAPChannel } Status current Description This trap indicates that an AM has detected an Adhoc network that is bridging to a wired network.
wlsxNAuthServerIsDown Objects { wlsxTrapTime, wlsxTrapAuthServerName } Status current Description This trap indicates that an authentication server is down. wlsxWindowsBridgeDetected Objects { wlsxTrapTime, wlsxTrapSourceMac, wlsxTrapTargetAPBSSID, wlsxTrapTargetAPSSID, wlsxTrapAPMacAddress, wlsxTrapAPRadioNumber, wlsxTrapAPLocation, wlsxTrapAPChannel } Status current Description This trap indicates that an AM has detected a station that is bridging from a wireless network to a wired network.
wlsxSignStaAsleap Objects {wlsxTrapTime, wlsxTrapSignatureName, wlsxTrapSourceMac, wlsxTrapSnr, wlsxTrapAPMacAddress, wlsxTrapAPRadioNumber, wlsxTrapAPLocation} Status current Description This trap indicates that an AP detected a signature match for ASLEAP from a Station.For more information check http://www.wve.
wlsxSignAPDeauthBcast Objects {wlsxTrapTime, wlsxTrapSignatureName, wlsxTrapTargetAPBSSID, wlsxTrapTargetAPSSID, wlsxTrapSnr, wlsxTrapAPMacAddress, wlsxTrapAPRadioNumber, wlsxTrapAPLocation} Status current Description This trap indicates that an AP detected a signature match for Deauth-Broadcast from an access point. For more information check: http://www.wve.org/entries/show/WVE-2005-0019 http://www.wve.
wlsxAdhocNetworkBridgeDetectedSta Objects wlsxTrapTime, wlsxTrapSourceMac, wlsxTrapTargetAPBSSID, wlsxTrapTargetAPSSID, wlsxTrapAPMacAddress, wlsxTrapAPRadioNumber, wlsxTrapAPLocation, wlsxTrapAPChannel Status current Description This trap indicates that an AM has detected an adhoc network that is bridging to a wired network wlsxDisconnectStationAttackAP Objects {wlsxTrapTime, wlsxTrapFrameType, wlsxTrapTargetAPBSSID, wlsxTrapTargetAPSSID, wlsxTrapSnr, wlsxTrapAPMacAddress, wlsxTrapAPRadioNumber, wls
Objects wlsxTrapTime, wlsxTrapTargetAPBSSID, wlsxTrapTargetAPSSID, wlsxTrapAPRadioNumber Status current Description This trap indicates that a previously detected access point, classified Suspected Rogue, is either no longer present in the network or has changed its state.
wlsxNAdhocNetworkBridgeDetectedAP Objects { wlsxTrapTime, wlsxTrapTargetAPBSSID, wlsxTrapTargetAPSSID, wlsxTrapSnr, wlsxTrapAPMacAddress, wlsxTrapAPRadioNumber, wlsxTrapAPLocation, wlsxTrapAPChannel} Status current Description This trap indicates that an AP detected an adhoc network that is bridging to a wired network.
wlsxAPSpoofingDetected Objects wlsxTrapTime, wlsxTrapTargetAPBSSID, wlsxTrapSourceMac, wlsxTrapReceiverMac, wlsxTrapSpoofedFrameType, wlsxTrapSnr, wlsxTrapAPMacAddress, wlsxTrapAPRadioNumber, wlsxTrapAPLocation, wlsxTrapAPChannel Status current Description This trap indicates that an AP detected that one of its virtual APs is being spoofed using MAC spoofing. For more information check http://www.wve.
wlsxOmertaAttack Objects wlsxTrapTime, wlsxTrapTargetAPBSSID, wlsxTrapTargetAPSSID, wlsxTrapNodeMac, wlsxTrapSnr, wlsxTrapAPMacAddress, wlsxTrapAPRadioNumber, wlsxTrapAPLocation, wlsxTrapAPChannel Status current Description This trap indicates that an AP detected an Omerta attack. For more information check http://www.wve.
wlsxValidClientMisassociation Objects wlsxTrapTime, wlsxTrapTargetAPBSSID, wlsxTrapTargetAPSSID, wlsxTrapNodeMac, wlsxTrapAssociationType, wlsxTrapSnr, wlsxTrapAPMacAddress, wlsxTrapAPRadioNumber, wlsxTrapAPLocation, wlsxTrapAPChannel Status current Description This trap indicates that an AP detected a misassociation between a valid client and an unsafe AP.
wlsxOverflowEAPOLKeyDetected Objects wlsxTrapTime, wlsxTrapAPMacAddress, wlsxTrapAPRadioNumber, wlsxTrapAPLocation, wlsxTrapSourceMac, wlsxTrapReceiverMac, wlsxTrapTargetAPBSSID, wlsxTrapAPChannel, wlsxTrapSnr Status current Description This trap indicates that an AP detected a key in an EAPOL Key message with a specified length greater than the length of the entire message. For more information check http://www.wve.
wlsxRTSRateAnomaly Objects wlsxTrapTime, wlsxTrapAPMacAddress, wlsxTrapAPRadioNumber, wlsxTrapAPLocation, wlsxTrapAPChannel Status current Description This trap indicates that the rate of RTS packets received by an AP exceeds the configured IDS threshold. wlsxNRogueAPDetected Objects wlsxTrapTime, wlsxTrapTargetAPBSSID, wlsxTrapTargetAPSSID, wlsxTrapAPChannel Status current Description This trap indicates that an unauthorized access point is connected to the wired network.
wlsxNSuspectRogueAPDetected Objects wlsxTrapTime, wlsxTrapTargetAPBSSID, wlsxTrapTargetAPSSID, wlsxTrapAPChannel, wlsxTrapConfidenceLevel Status current Description This trap indicates that an access point, classified as suspected rogue, is detected by the system. The AP is suspected to be rogue with the supplied confidence level.
wlsxNSignatureMatch Objects wlsxTrapTime, wlsxTrapTargetAPBSSID, wlsxTrapTransmitterMac, wlsxTrapReceiverMac, wlsxTrapSignatureName, wlsxTrapSnr, wlsxTrapAPMacAddress, wlsxTrapAPRadioNumber, wlsxTrapAPLocation, wlsxTrapAPChannel Status current Description This trap indicates that an AP detected a signature match in a frame.
wlsxNSignatureMatchNullProbeResp Objects wlsxTrapTime, wlsxTrapTargetAPBSSID, wlsxTrapTransmitterMac, wlsxTrapReceiverMac, wlsxTrapSignatureName, wlsxTrapSnr, wlsxTrapAPMacAddress, wlsxTrapAPRadioNumber, wlsxTrapAPLocation, wlsxTrapAPChannel Max-Access Status current Description This trap indicates that an AP detected a signature match for Null-Probe-Response in a frame. For more information check http://www.wve.
wlsxNSignatureMatchWellenreiter Objects wlsxTrapTime, wlsxTrapTargetAPBSSID, wlsxTrapTransmitterMac, wlsxTrapReceiverMac, wlsxTrapSignatureName, wlsxTrapSnr, wlsxTrapAPMacAddress, wlsxTrapAPRadioNumber, wlsxTrapAPLocation, wlsxTrapAPChannel Status current Description This trap indicates that an AP detected a signature match for Wellenreiter in a frame. For more information check http://www.wve.
wlsxAPTaggedWiredContainment Objects wlsxTrapTime, wlsxTrapTargetAPBSSID, wlsxTrapNodeMac, wlsxTrapDeviceIpAddress, wlsxTrapDeviceMac, wlsxTrapVlanId, wlsxTrapAPMacAddress, wlsxTrapAPRadioNumber, wlsxTrapAPLocation Status current Description This trap indicates that an AP has attempted to contain an access point by disrupting traffic to its client on the wired interface.
wlsxAPModeChange Objects wlsxTrapTime, wlsxTrapAPCurMode, wlsxTrapAPPrevMode, wlsxTrapAPMacAddress, wlsxTrapAPRadioNumber, wlsxTrapAPLocation Status current Description This trap indicates that an AP changed its mode from AP to AP Monitor or vice versa.
wlsxMgmtUserAuthenticationFailed Objects wlsxTrapTime, wlsxTrapUserName, wlsxTrapUserIpAddress, wlsxTrapAuthServerName Status current Description SNMP Traps SNMP Traps are MIB objects (variables) that transmit information to the SNMP Manager when an event occurs. Traps are included as varbinds (variable bindings) in the trap protocol data unit (PDU).
