Manual

Each peripheral connection must be assigned an IRQ number. For example, the first serial port in your system (COM1) is assigned to IRQ4 by default. Two
devices can share the same IRQ assignment, but you cannot operate both devices simultaneously.

ITE
Abbreviation for information technology equipment.

jumper
Jumpers are small blocks on a circuit board with two or more pins emerging from them. Plastic plugs containing a wire fit down over the pins. The wire
connects the pins and creates a circuit. Jumpers provide a simple and reversible method of changing the circuitry in a printed circuit board.

K
Abbreviation for kilo-, indicating 1,000.

KB
Abbreviation for kilobyte(s), 1,024 bytes.

KB/sec
Abbreviation for kilobyte(s) per second.

Kbit(s)
Abbreviation for kilobit(s), 1,024 bits.

Kbit(s)/sec
Abbreviation for kilobit(s) per second.

key combination
A command requiring you to press multiple keys at the same time. For example, you can reboot your system by pressing the <Ctrl><Alt><Del> key
combination.

kg
Abbreviation for kilogram(s), 1,000 grams.

kHz
Abbreviation for kilohertz, 1,000 hertz.

LAN
Acronym for local area network. A LAN system is usually confined to the same building or a few nearby buildings, with all equipment linked by wiring dedicated
specifically to the LAN.

lb
Abbreviation for pound(s).

LED
Abbreviation for light-emitting diode. An electronic device that lights up when a current is passed through it.