Owner manual

E0780
MISSING CPU 1
Microprocessor is not installed in socket 1.
Install a microprocessor in socket 1 (see "Adding or Replacing a
Microprocessor" in "Installing System Options"). To identify microprocessor
socket 1, see FigureA-4.
E07F0
CPU IERR
Faulty or improperly installed microprocessor,
microprocessor board, or I/O board.
See "Troubleshooting the Microprocessor Board" and "Troubleshooting the I/O
Board" in "Troubleshooting Your System."
E07F1
TEMP CPU n
HOT
Specified microprocessor is out of acceptable
temperature range and has halted operation.
See "Troubleshooting System Cooling" in "Troubleshooting Your System." If the
problem persists, ensure that the microprocessor heat sinks are properly
installed (see "Adding or Replacing a Microprocessor" in "Installing System
Options").
E07F4
POST CACHE
Faulty or improperly installed microprocessor or
microprocessor board.
See "Troubleshooting the Microprocessor Board" in "Troubleshooting Your
System."
E07F4
POST CPU REG
E07F4
POST CPU SMI
SMI handler failed to initialize; faulty or
improperly installed I/O riser card, I/O board, or
microprocessor board.
See "Troubleshooting the I/O Riser Card," "Troubleshooting the I/O Board,"
and "Troubleshooting the Microprocessor Board" in "Troubleshooting Your
System."
E07FA
TEMP CPU n
THERM
Specified microprocessor is out of acceptable
temperature range and is operating at a
reduced speed, or frequency.
See "Troubleshooting System Cooling" in "Troubleshooting Your System." If the
problem persists, ensure that the microprocessor heat sinks are properly
installed (see "Adding or Replacing a Microprocessor" in "Installing System
Options").
E0876
POWER PS n
No power is available from the specified power
supply; specified power supply is improperly
installed or faulty.
See "Troubleshooting Power Supplies" in "Troubleshooting Your System."
E0880
INSUFFICIENT
POWER PS
Insufficient power is being supplied to the
system; power supplies are improperly
installed, faulty, or missing.
See "Troubleshooting Power Supplies" in "Troubleshooting Your System."
E08F4
AC LINE n
No power available through the specified
power cord.
Ensure that all power cords are securely connected. See "External
Connections" in "Troubleshooting Your System."
E0CB2
MEM MIRROR
Uncorrectable memory error was remapped to
the mirrored memory bank.
See "Troubleshooting System Memory" in "Troubleshooting Your System."
E0CB2
MEM SPARE ROW
Correctable errors threshold was met in a
memory bank, and errors are remapped to the
spare row.
E0CF1
MBE DIMM Bank
n
Memory modules installed in the specified bank
are not the same type and size; faulty memory
module(s).
Ensure that all banks contain memory modules of the same type and size and
that they are properly installed. If the problem persists, see "Troubleshooting
System Memory" in "Troubleshooting Your System."
E0CF1
POST MEM 64K
Parityfailureinthefirst64KBofmainmemory.
See "Troubleshooting System Memory" in "Troubleshooting Your System."
E0CF1
POST NO MEMORY
Main-memory refresh verification failure.
Ensure that all banks contain memory modules of the same type and size and
that they are properly installed. If the problem persists, see "Troubleshooting
System Memory" in "Troubleshooting Your System."
E0CF5
LOG DISABLE
SBE
Multiple single-bit errors on a single memory
module.
See "Troubleshooting System Memory" in "Troubleshooting Your System."
E0D76
DRIVE FAIL
Faulty or improperly installed hard drive or RAID
controller.
See "Troubleshooting Hard Drives" and "Troubleshooting a RAID Controller
Card" in "Troubleshooting Your System."
E0F04
POST CMOS
CMOS write/read failure; faulty or improperly
installed I/O riser card, I/O board, or
microprocessor board.
See "Troubleshooting the I/O Riser Card," "Troubleshooting the I/O Board,"
and "Troubleshooting the Microprocessor Board" in "Troubleshooting Your
System."
E0F04
POST CPU SPEED
Microprocessor speed control sequence failure.
See "Troubleshooting the Microprocessor Board" in "Troubleshooting Your
System."
E0F04
POST DMA INIT
DMA initialization failure; DMA page register
write/read failure.
See "Troubleshooting System Memory" and "Troubleshooting the I/O Board" in
"Troubleshooting Your System."
E0F04
POST DMA REG
Faulty I/O board.
See "Troubleshooting the I/O Board" in "Troubleshooting Your System."
E0F04
POST KYB CNTRL
Faulty keyboard controller; faulty I/O riser card.
See "Troubleshooting the I/O Riser Card" in "Troubleshooting Your System."
E0F04
POST MEM RFSH
Main-memory refresh verification failure.
See "Troubleshooting System Memory" in "Troubleshooting Your System."
E0F04
POST PIC REG
Master or slave PIC register test failure.
See "Troubleshooting the I/O Board" in "Troubleshooting Your System."
E0F04
POST SHADOW
BIOS shadowing failure.
See "Troubleshooting the I/O Board" and "Troubleshooting System Memory" in
"Troubleshooting Your System."
E0F04
POST SHD TEST
Shutdown test failure.
E0F04
POST SIO
Super I/O chip failure; faulty I/O riser card.
See "Troubleshooting the I/O Riser Card" in "Troubleshooting Your System."
E0F04
POST TIMER
Programmable interval timer test failure; faulty
I/O board.
See "Troubleshooting the I/O Board" in "Troubleshooting Your System."
E0F0B
POST ROM
CHKSUM
Faulty or improperly installed expansion card.
See "Troubleshooting Expansion Cards" in "Troubleshooting Your System."
E0F0C
VID MATCH CPU
n
Specified microprocessor is faulty, unsupported,
improperly installed, or missing.
See "Troubleshooting the Microprocessor Board" in "Troubleshooting Your
System."
E10F3
LOG DISABLE
BIOS
BIOS disabled logging errors.
Check the SEL for details on the errors.
E13F2
IO CHANNEL
CHECK
Faulty or improperly installed expansion card or
I/O board.
See "Troubleshooting Expansion Cards" and "Troubleshooting the I/O Board" in
"Troubleshooting Your System."
E13F4
PCI PARITY
E13F5
PCI SYSTEM
E13F8
CPU BUS INIT
Faulty or improperly installed microprocessor,
microprocessor board, or I/O board.
See "Troubleshooting the I/O Board" and "Troubleshooting the Microprocessor
Board" in "Troubleshooting Your System."
E13F8
CPU BUS PARITY
Faulty microprocessor board.
See "Troubleshooting the Microprocessor Board" in "Troubleshooting Your
System."
E13F8
CPU MCKERR
Machine check error; faulty or improperly
installed microprocessor or microprocessor