Installation and Troubleshooting Guide

10. Remove the expansion cards from expansion slots 6 and 7, if installed. See "Expansion Cards" in "Installing System Components."

11. Reinstall the password jumper plug on pins 1 and 2 to enable the password protection feature.

12. Replace the expansion cards in expansion slots 6 and 7, if removed. See "Expansion Cards" in "Installing System Components."

13. Close the system, reconnect the system to the electrical outlet, and turn on the system.

14. Assign a new system and/or setup password.
To assign a new password using the System Setup program, see "Using the System Setup Program" in your User's Guide.
Back to Contents Page
