Manual

8 Information Update
E0412 RPM FAN PS BLANK Power supply fan RPM is out
of acceptable range.
See "Troubleshooting System
Cooling Problems" in your
Installation and Troubleshooting
Guide.
E0412 RPM FAN n
FAN REDUNDANCY
LOST
Specified cooling fan is faulty,
improperly installed, or missing.
See "Troubleshooting System
Cooling Problems" in your
Installation and Troubleshooting
Guide.
E0780 PROC # CONFIG
ERR
The specified processor has a
configuration error.
See "Troubleshooting the
Microprocessors" in your
Installation and Troubleshooting
Guide.
E0780 PROC # DISABLED The specified processor is
disabled.
See "Troubleshooting the
Microprocessors" in your
Installation and Troubleshooting
Guide.
E0780 PROC n PRESENCE Microprocessor is not installed
in socket n.
Install a microprocessor in socket
n. See "Installing a Processor"
in your Installation
and Troubleshooting Guide.
E07F0 PROC n IERR Faulty or improperly installed
microprocessor.
See "Troubleshooting the
Microprocessors" in your
Installation and Troubleshooting
Guide.
Table 1-2. LCD Status Messages (continued)
Line 1
Message
Line 2
Message
Causes Corrective Actions