Manual

12 Information Update
IRQ5 Availability
IRQ5 is available for use and is not pre-assigned to a remote access controller. See "IRQ Assignment
Conflicts" in your Installation and Troubleshooting Guide for a complete list of IRQ assignments.
EB113 CHIPSET ERR An error has occurred in the
chipset.
See "Troubleshooting the
Microprocessors" in your
Installation and Troubleshooting
Guide. If the problem persists, see
"Troubleshooting Expansion
Cards" in your Installation
and Troubleshooting Guide. If the
problem still persists, see
"Getting Help" in your
Installation and Troubleshooting
Guide.
EFFF2 ROMB PRESENCE Integrated RAID controller is
activated.
Information only.
I0000 BIB BMC unable to read BIOS Initial
Block (BIB).
See "Getting Help" in your
Installation and Troubleshooting
Guide.
IB110 SBE LOG DISABLED Single-bit error log disabled. Information only.
IB110 LOGGING DISABLED BIOS logging disabled. Information only.
IB10C MEMORY SPARED Memory spare bank enabled. Information only.
IB10C MEMORY MIRRORED Memory mirroring enabled. Information only.
IB10C MEMORY RAID Memory RAID enabled. Information only.
IB10C MEMORY ADDED
CARD #
Hot-plug memory added. Information only.
IB10C MEMORY REMOVED Hot-plug memory removed. Information only.
IS000 INTRUSION System cover has been removed. Information only
NOTE: For the full name of an abbreviation or acronym used in this table, see the "Glossary"
in your User’s Guide.
Table 1-2. LCD Status Messages (continued)
Line 1
Message
Line 2
Message
Causes Corrective Actions