Users Guide
Managing virtual disks using RACADM
Use the following commands to manage virtual disks:
• To delete virtual disk:
racadm storage deletevd:<VD FQDD>
• To initialize virtual disk:
racadm storage init:<VD FQDD> -speed {fast|full}
• To check consistency of virtual disks (not supported on RAID0):
racadm storage ccheck:<vdisk fqdd>
To cancel the consistency check:
racadm storage cancelcheck: <vdisks fqdd>
• To encrypt virtual disks:
racadm storage encryptvd:<VD FQDD>
• To assign or unassign dedicated hot spares:
racadm storage hotspare:<Physical Disk FQDD> -assign <option> -type dhs -vdkey: <FQDD of
VD>
<option>=ye
s
Assign hot spare
<Option>=no Unassign hot spare
Managing controllers
You can perform the following for controllers:
• Configure controller properties
• Import or auto import foreign configuration
• Clear foreign configuration
• Reset controller configuration
• Create, change, or delete security keys
Related links
Configuring controller properties
Importing or auto importing foreign configuration
Clearing foreign configuration
Resetting controller configuration
Supported controllers
Summary of supported features for storage devices
Converting a physical disk to RAID or non-RAID mode
Configuring controller properties
You can configure the following properties for the controller:
• Patrol read mode (auto or manual)
• Start or stop patrol read if patrol read mode is manual
• Patrol read unconfigured areas
• Check consistency mode
• Copyback mode
• Load balance mode
193