Users Guide

• You can also configure the chassis locator LED and based on the color, assess the system health.
• If iDRAC Service Module is installed, the operating system host information is displayed.
Related links
Viewing system health
Using iDRAC Service Module
Generating SupportAssist Collection
Setting up alerts and configuring email alerts
To set up alerts and configure email alerts:
1. Enable alerts.
2. Configure the email alert and check the ports.
3. Perform a reboot, power off, or power cycle the managed system.
4. Send test alert.
Viewing and exporting Lifecycle log and System Event Log
To view and export lifecycle log and system event log (SEL):
1. In iDRAC Web interface, go to Overview → Server → Logs to view SEL and Overview → Server → Logs → Lifecycle Log to
view lifecycle log.
NOTE: The SEL is also recorded in the lifecycle log. Using the filtering options to view the SEL.
2. Export the SEL or lifecycle log in the XML format to an external location (management station, USB, network share, and so
on). Alternatively, you can enable remote system logging, so that all the logs written to the lifecycle log are also simultaneously
written to the configured remote server(s).
3. If you are using the iDRAC Service Module, export the Lifecycle log to OS log. For more information, see Using iDRAC Service
Module.
Interfaces to update iDRAC firmware
Use the following interfaces to update the iDRAC firmware:
• iDRAC Web interface
• RACADM CLI (iDRAC and CMC)
• Dell Update Package (DUP)
• CMC Web interface
• Lifecycle Controller–Remote Services
• Lifecycle Controller
• Dell Remote Access Configuration Tool (DRACT)
Performing graceful shutdown
To perform graceful shutdown, in iDRAC Web interface, go to one of the following locations:
• Overview → Server → Power/Thermal → Power Configuration → Power Control. The Power Control page is displayed.
Select Graceful Shutdown and click Apply.
• Overview → Server → Power/Thermal → Power Monitoring. From the Power Control drop-down menu, select Graceful
Shutdown and click Apply.
NOTE: All Power options are dependent on the host operating system. For the options to function properly, you must
make required changes in the operating system. For example, Gnome-tweak-tool in RHEL 7.2.
For more information, see the iDRAC Online Help.
292