Users Guide

Creating new administrator user account
You can modify the default local administrator user account or create a new administrator user account. To modify the local
administrator user account, see Modifying local administrator account settings.
To create a new administrator account, see the following sections:
Configuring local users
Configuring active directory users
Configuring generic LDAP users
Launching server's remote console and mounting a USB drive
To launch the remote console and mount a USB drive:
1. Connect a USB flash drive (with the required image) to the management station.
2. Use one the following methods to launch virtual console through the iDRAC Web Interface:
Go to OverviewServerVirtual Console and click Launch Virtual Console.
Go to OverviewServerProperties and click Launch under Virtual Console Preview.
The Virtual Console Viewer is displayed.
3. From the File menu, click Virtual MediaLaunch Virtual Media.
4. Click Add Image and select the image that is located on the USB flash drive.
The image is added to the list of available drives.
5. Select the drive to map it. The image on the USB flash drive is mapped to the managed system.
Installing bare metal OS using attached virtual media and remote file
share
To do this, see Deploying operating system using remote file share.
Managing rack density
Suppose two servers are installed in a rack. To add two additional servers, need to determine how much capacity is left in the rack.
To assess the capacity of a rack to add additional servers:
1. View the current power consumption data and historical power consumption data for the servers.
2. Based on the data, power infrastructure and cooling system limitations, enable the power cap policy and set the power cap
values.
NOTE: It is recommended that you set a cap close to the peak, and then use that capped level to determine how
much capacity is remaining in the rack for adding more servers.
Installing new electronic license
See License operations for more information.
293