Users Guide

6. Click Submit. You are logged in to iDRAC with the required user privileges.

If you log in with Configure Users privileges and the default account credentials, and if the default password warning feature is

enabled, the Default Password Warning page is displayed allowing you to easily change the password.

Related links

Logging in to iDRAC as a local user using a smart card

Logging in to iDRAC as an Active Directory user using a smart card

Logging in to iDRAC as a local user using a smart card

Before you log in as a local user using Smart Card, make sure to:

• Upload user smart card certificate and the trusted Certificate Authority (CA) certificate to iDRAC

• Enable smart card logon.

The iDRAC web interface displays the smart card logon page for users who are configured to use the smart card.

NOTE: Depending on the browser settings, you are prompted to download and install the smart card reader ActiveX

plug-in when using this feature for the first time.

To log in to iDRAC as a local user using smart card:

1. Access the iDRAC web interface using the link https://[IP address].

The iDRAC Login page is displayed prompting you to insert the smart card.

NOTE: If the default HTTPS port number (port 443) has been changed, type: https://[IP address]:[port

number] where, [IP address] is the IP address for the iDRAC and [port number] is the HTTPS port

number.

2. Insert the Smart Card into the reader and click Login.

A prompt is displayed for the Smart Card’s PIN. A password in not required.

3. Enter the Smart Card PIN for local Smart Card users.

You are logged in to the iDRAC.

NOTE: If you are a local user for whom Enable CRL check for Smart Card Logon is enabled, iDRAC attempts to

download the CRL and checks the CRL for the user's certificate. The login fails if the certificate is listed as revoked

in the CRL or if the CRL cannot be downloaded for some reason.