Users Guide

• IPAddress (-i) — Indicates the IP address of the file share.

NOTE: Sharename (-n), ShareType (-s), and IPAddress (-i) are required attributes that must be passed.

• Username (-u) — Indicates the user name required to access the network share. This information is required only for CIFS.

• Password (-p) — Indicates the password required to access the network share. This information is required only for CIFS.

• ShutdownType (-d) — Indicates the mode of shutdown. 0 indicates Graceful shutdown and 1 indicates Forced shutdown.

NOTE: The default setting is 0.

• Timetowait (-t) — Indicates the time the host system waits before shutting down. The default setting is 300.

• EndHostPowerState (-e) — Indicates the power state of the host. 0 indicates OFF and 1 indicates ON. The default setting

is 1.

NOTE: ShutdownType (-d), Timetowait (-t), and EndHostPowerState (-e) are optional attributes.

NOTE: On DHCP servers running Windows the operating system with iDRAC version prior to 2.20.20.20, make sure

that you add a space before the (–f).

NFS: -f system_config.xml -i 192.168.1.101 -n /nfs_share -s 0 -d 1

CIFS: -f system_config.xml -i 192.168.1.101 -n cifs_share -s 2 -u <USERNAME> -p <PASSWORD> -d 1 -t 400

Configuring option 43 and option 60 on Linux

Update the /etc/dhcpd.conf file. The steps to configure the options are similar to the steps for Windows:

1. Set aside a block or pool of addresses that this DHCP server can allocate.

2. Set the option 43 and use the name vendor class identifier for option 60.

option myname code 43 = text;

subnet 192.168.0.0 netmask 255.255.0.0 {

#default gateway

option routers 192.168.0.1;

option subnet-mask 255.255.255.0;

option nis-domain "domain.org";

option domain-name "domain.org";

option domain-name-servers 192.168.1.1;

option time-offset -18000; # Eastern Standard Time

option vendor-class-identifier "iDRAC";

set vendor-string = option vendor-class-identifier;

option myname "-f system_config.xml -i 192.168.0.130 -u user -p password -n cifs -s

2 -d 0 -t 500";

range dynamic-bootp 192.168.0.128 192.168.0.254;

default-lease-time 21600;

max-lease-time 43200;

}

The following are the required and optional parameters that must be passed in the vendor class identifier string:

• Filename (–f) — Indicates the name of the exported Server Configuration Profile XML file. Specifying the filename is

optional with iDRAC version 2.20.20.20 or later.

NOTE: For more information on file naming rules, see Configuring servers and server components using Auto

Config.

• Sharename (-n) — Indicates the name of the network share.

• ShareType (-s) — Indicates the share type. 0 indicates NFS and 2 indicates CIFS.

• IPAddress (-i) — Indicates the IP address of the file share.

NOTE: Sharename (-n), ShareType (-s), and IPAddress (-i) are required attributes that must be passed.

• Username (-u) — Indicates the user name required to access the network share. This information is required only for CIFS.

• Password (-p) — Indicates the password required to access the network share. This information is required only for CIFS.