Users Guide

NOTE: Configuration changes and firmware updates that are made within the operating system may not reflect properly

in the inventory until you perform a server restart.

When you check for updates, the version marked as Available does not always indicate that it is the latest version available. Before

you install the update, ensure that the version you choose to install is newer than the version currently installed. If you want to

control the version that iDRAC detects, create a custom repository using Dell Repository Manager (DRM) and configure iDRAC to

use that repository to check for updates.

Related links

Updating single device firmware

Updating firmware using repository

Updating firmware using FTP, TFTP, or HTTP

Updating device firmware using RACADM

Scheduling automatic firmware updates

Updating firmware using CMC web interface

Updating firmware using DUP

Updating firmware using remote RACADM

Updating firmware using Lifecycle Controller Remote Services

Updating firmware using iDRAC web interface

You can update the device firmware using firmware images available on the local system, from a repository on a network share

(CIFS or NFS), or from FTP.

Updating single device firmware

Before updating the firmware using single device update method, make sure that you have downloaded the firmware image to a

location on the local system.

NOTE: Ensure that the file name for the single component DUP does not have any blank space.

To update single device firmware using iDRAC web interface:

1. Go to Overview → iDRAC Settings → Update and Rollback.

The Firmware Update page is displayed.

2. On the Update tab, select Local as the File Location.

3. Click Browse, select the firmware image file for the required component, and then click Upload.

4. After the upload is complete, the Update Details section displays each firmware file uploaded to iDRAC and its status.

If the firmware image file is valid and was successfully uploaded, the Contents column displays a plus icon ( ) icon next to the

firmware image file name. Expand the name to view the Device Name, Current, and Available firmware version information.

5. Select the required firmware file and do one of the following:

• For firmware images that do not require a host system reboot, click Install. For example, iDRAC firmware file.

• For firmware images that require a host system reboot, click Install and Reboot or Install Next Reboot.

• To cancel the firmware update, click Cancel.

When you click Install, Install and Reboot, or Install Next Reboot, the message Updating Job Queue is displayed.

6. To display the Job Queue page, click Job Queue. Use this page to view and manage the staged firmware updates or click OK

to refresh the current page and view the status of the firmware update.

NOTE: If you navigate away from the page without saving the updates, an error message is displayed and all the

uploaded content is lost.