Owners Manual

Konfiguration PCIe-
Steckplat
z
Prozessoranschlus
s
Höhe Baulänge Verbindun
gsbandbre
ite
Steckplatzb
reite
(Konfiguration H)
2 Prozessor 2 Low-Profile Halbe
Baulänge
x8 x16
Drei PCIe-GPUs ohne Switch-Platine
und mit zwei Prozessoren
(Konfiguration I)
1 Prozessor 1 Low-Profile Halbe
Baulänge
x8 x16
2 - - - - -
Vier SXM2-GPUs mit NVLink-Platine
und zwei Prozessoren
(Konfiguration K)
1 Prozessor 1 Low-Profile Halbe
Baulänge
x8 x16
2 Prozessor 1 Low-Profile Halbe
Baulänge
x16 x16
ANMERKUNG: Konfiguration G unterstützt den virtuellen Modus. Im virtuellen Modus sind GPUs 1 und 2 mit Prozessor
1, und GPUs 3 und 4 mit Prozessor 2 verbunden.
Die folgende Tabelle enthält Vorschläge für die Installation von Erweiterungskarten hinsichtlich bestmöglicher Kühlung und mechanischer
Unterbringung. Erweiterungskarten sollten nach der in der Tabelle angegebenen Kartenprioritäts- und Steckplatzprioritätsreihenfolge
installiert werden.
ANMERKUNG:
Die Riserkarten der Breite x 16 auf dem Erweiterungskarten-Riser sind mit der Systemplatine verkabelt.
ANMERKUNG: Bei Konfiguration K ist die Riser-Karte der Breite x16 auf dem Erweiterungskartengehäuse mit der
Systemplatine verkabelt.
ANMERKUNG: Die Erweiterungskartensteckplätze sind nicht hot-swap-fähig.
Tabelle 32. Installationsreihenfolge für Erweiterungskarten
Katego
rie
Kar
ten
prio
ritä
t
Kartentyp Konfiguration
en A und B
Konfigurationen
C, F und H
Konfigurationen D
und G
Konfigurationen
E und I
Konfiguration K
Steck
platz
priori
tät
Max.
erlaub
t
Steck
platzp
rioritä
t
Max.
erlaubt
Steckpla
tzpriorit
ät
Max.
erlaubt
Steck
platz
priori
tät
Max.
erlaubt
Steckpl
atzpriori
tät
Max.
erlaubt
RAID
1 H730P
(Niedrigprofil)
1 1 1 1 1 1 1 1 - -
2 H730
(Niedrigprofil)
1 1 1 1 1 1 1 1 - -
3 H330
(Niedrigprofil)
1 1 1 1 1 1 1 1 - -
H330
(Niedrigprofil)
IEC
1 1 1 1 1 1 1 1 - -
4 H830
(Niedrigprofil)
1, 2 2 1, 2 2 1, 2 2 1 1 1 1
5 H810
(Niedrigprofil)
1, 2 2 1, 2 2 1, 2 2 1 1 1 1
6 12-GB-SAS-HBA
(Low Profile)
1, 2 2 1, 2 2 1, 2 2 1 1 - -
Non-
RAID
HBA330-Adapter 1 1 1 1 1 1 1 1 - -
InfiniBan
d
Mellanox Dual-
Port-Karte
2 1 k. A. 0 1, 2 2 k. A. 0 2 1
Mellanox Single-
Port-Karte
2 1 k. A. 0 1, 2 2 k. A. 0 2 1
Installieren und Entfernen von Systemkomponenten 105