Owners Manual

Figure 27. Removing the system air shroud for K and M configurations

Next steps

Replace the air shroud.

Installing the air shroud

Prerequisites

1. Follow the safety guidelines listed in Safety instructions on page 23.

2. Follow the procedure listed in Before working inside your system.

NOTE: Route the cable properly to prevent the cable from being pinched or crimped.

Steps

1. Align the tabs on the air shroud with the slots on the system.

2. Lower the air shroud into the system until it is firmly seated.

When firmly seated, the memory socket numbers marked on the air shroud align with the respective memory sockets.

PowerEdge C4140 installing and removing system components