Owners Manual

Figure 71. Installing the GPU switch board
Next steps
1. Connect the GPU switch board power cable.
2. Installing a GPU on page 74
3. Connect the GPU signal cables to the switch board and the system board.
4. Follow the procedure listed in After working inside your system on page 24.
Installing the custom GPU brackets on the replacement GPUs
Prerequisites
1. Follow the safety guidelines listed in Safety instructions on page 23.
2. Keep the Phillips #1 and #2 screwdrivers ready.
3. Install the GPU brackets on the GPU removed from your system.
Steps
1. Align the screw holes on the front I/O bracket with the screw holes on the GPU.
2. Secure the I/O bracket to the GPU by using the screws.
3. Align the screw holes on the support bracket with the screw holes on the GPU.
4. Secure the support bracket to the GPU by using the screws.
PowerEdge C4140 installing and removing system components
71